Telex FM-1, SMP operating instructions QSB-1 Specifications, QSB-1 Card Reader

Section

3

QSB-1

QSB-1 Connections

The QSB-1 (Qard Serial Bus) pod interfaces with the SMP (System Manager Program) via a USB connection to the com- puter. The QSB-1 allows the user to download events into a small, convenient, DataFlash→ memory card. Event(s) and Snapshot(s) of the system can also be uploaded to the SMP from the card via the QSB-1.

The card for use with the QSB-1 is a 2 MB DataFlash→ mem- ory card. These may be purchased in various electronic stores or from Telex, see the “Accessories and Replacement Parts” section of the manual.

NOTE: Item 2 is Located

2

on back of Unit

1

NOTE: The 2 MB card is the only size currently compatible

with the FM-1, QSB-1 and SMP. Larger or smaller

Figure 3-1

The QSB-1 Card Reader

DataFlash→ cards will NOT work.

1. Card Slot - Only use 2 MB DataFlash→ memory cards.

2. USB Connection – Connect USB cable from computer.

The QBS-1 is powered from the computer via it’s USB cable.

	QSB-1 Specifications
Temperature Range	....................................................................................................................32°F to 104°F (0°C to 40°C)
Dimensions	2.47”W x 0.97”H x 3.37”D
	(6.3 cm x 2.5 cm x 8.6 cm)
Weight	2 oz (57 g)
USB Type	Version 1.1 or 2.0
Memory Card Type	DataFlash→, 2 MB Only

DataFlash→ is a registered trademark of Atmel→ Corporation

3-1