Telex QSB-1, FM-1, SMP operating instructions Introduction, Overall Description

Page 4

Section

1

Introduction

Overall Description

The SMP Software along with the QSB-1 and FM-1 allow a user to easily manage large systems of BTR-1 base stations along with their beltpacks.

The SMP (System Manager Program) software enables a user to set-up multiple events on the computer. An event is a partic- ular situation where a pack of ten base stations need their pa- rameter set a certain way. These parameters include transmit and receive frequencies, intercom levels, auxiliary levels, to name a few. The event could be a football game or act one of a broadway show, the possible applications are endless. A good example is a college football team which uses a ten pack BTR-1 system for its’ coaches on the field to talk to each other and the personal in the press box. If that team plays twelve games a year and six of them are away then the SMP could be used to set up 7 events. Event one would be the frequencies and parameters for a ten pack of base stations used at home. The other six events would be the ten pack’s frequencies and parameters for the away locations.

The QSB-1 (Qard Serial Bus) pod interfaces with the SMP via a USB connection to the computer. This enables the user to download events into a small, convenient, DataFlash® card. FM-1 "Snap Shots" can also be uploaded to the SMP from the DataFlash→ card via the QSB-1.

The FM-1 (Frequency Manager) interfaces with up to ten BTR-1 base stations. The FM-1 talks to the bases via a CAN bus system. The CAN bus starts at the FM-1 and daisy chains through all the base stations and then back to the FM-1 to ter- minate. The DataFlash→ card is inserted in the card reader slot for the FM-1 to read events from the card. With the DataFlash→ card in the FM-1 the user can select an event on the card and download the selected event. Now the user can download the event into the base stations. The FM-1 can also take “snap shots”of the ten pack of bases and download those parameters on the DataFlash→ card for eventually uploading into the SMP.

DataFlash®is a registered trademark of Atmel→ Corporation

1-1

Image 4
Contents Telex Table of Content Ii- Blank Introduction Overall DescriptionBlank Installing the Program Step Installing Driver for QSB-1 Card Reader StepSystem Manager Program SMP Software System Manager Program SMPLaunching the System Manager Program Step Main screen of the system manager programMain menu bar definitions are defined Below Using the System Manager ProgramEvent Name Configuration Button Base Main ScreenButton Options Button C ScreenDownloading an Event Downloading / UploadingUploading a SnapShot QSB-1 QSB-1 SpecificationsQSB-1 Card Reader Blank FM-1 Frequency Manager Front Panel Controls and ConnectionsRear Panel Controls and Connections Front View of FM-1FM-1 Specifications OperationSelecting an Event and Downloading to System Snap ShotDownloading a Card Blank FM-1 Menu Flow Chart FM-1 Menu StructureBlank Software License End-User License Agreement for Telex SoftwareBlank DataFlash→ Card Handling and Storage Precautions Blank Frequency Bands Band Pairing for SystemsFrequency Bands Blank Replacement Parts and Accessories Blank