SpeakerCraft BassX-W10 owner manual Diagram, Installation Overview

Page 4 BassX-W10 Owner’s Manual

Please use Diagram 1 for a quick installation overview, which will be explored in greater detail throughout this manual.

DIAGRAM 1

Installation Overview

STEP 5:

Install baffle by tightening dogging screws until baffle gasket contacts face of speaker

STEP 1:

Cut opening in drywall per template provided

STEP 2:

Slide bracket through drywall opening. Expand bracket until contact is made with inside wall of studs. Secure slide bracket to studs.

STEP 4:

Bolt speaker to mounting bracket using machine screws provided

CAUTION: Overtightening can cause plastic baffle to contact speaker and cause vibration noise

STEP 3:

Tighten slide adjustmnent screws To secure brackets together

CAUTION: Faliure to tighten locking screws, can result in vibration noise

CAUTION

•The BassX-W10 is designed to work only with the BBXW10 amplifier. To insure maximum sound quality and performance, use only this amp.

•The installation bracket must be aligned accurately in the center of the cut out hole in the drywall. This is to insure proper alignment with the woofer and baffle.

•Please follow the instructions below carefully. For technical inquires, please call 1-800-448-0976 or e-mail us at techsupport@speakercraft.com.