Volume control
Main unit operation:
Turn volume knob clockwise to increase the volume and anti- clockwise to decrease the volume.
Remote control operation:
Press the VOL + button to increase the volume and the VOL – button to decrease the volume.
Note:
Do not turn the volume knob manually in reverse direction when operating it by remote control.
Crossover frequency control
Adjust the high frequency
To emphasise the bass, turn this control towards 80 Hz and increase the volume.
Notes:
Observe the following to avoid malfunction and sound distortion. Do not set the volume too high on the audio system. The subwoofer may be damaged.
Before you switch on/off the subwoofer, minimise the volume on the audio system.
Auto power off
If no signal is detected for 20 minutes during power on, the subwoofer will automatically go to
Operating the TV with the remote control
You can operate SHARP TV with this system’s remote control.
TV operation buttons
Watching TV
Point the remote control at the TV.
1Press the TV POWER button to turn on the TV.
2Press the CH UP 
or CH DOWN 
button to set the channel.
Pressing the CH UP 
or CH DOWN 
button enables TV channel switching.
3Press TV VOL + or – button to adjust the TV volume.
Other operable button
Press the Input Select button to switch the input source. (TV)
Note:
Some models of SHARP TV may not be operable. In this case, use the remote control supplied with each product.
ENGLISH
Advanced Feature