Sharp PN-R603 ALL Reset, Adjustment Lock Target, RS-232C/LAN, OSD Display, Led, Status Alert

Page 32

Initialization (Reset)/Functional Restriction Setting (FUNCTION)

You can return the settings to their factory-preset values and restrict operations.

1.Hold SIZE down until “F” appears in the upper left corner of the screen.

2.While “F” appears, press , , , in that order.

FUNCTION

ALL RESET

 

OFF

 

ADJUSTMENT LOCK

 

ADJUSTMENT LOCK TARGET

UNLOCKED

 

RS-232C/LAN

 

OSD DISPLAY

ON 1

 

LED

ON

 

TEMPERATURE ALERT

LED

 

STATUS ALERT

OFF

 

POWER BUTTON

MONITOR

 

CONTROLLER INPUT

 

 

 

OK…[ENTER] END…[RETURN]

3.Select and set the items.

ALL RESET

Resets the settings to the factory default settings.

Press ENTER , select the resetting method, and then press

ENTER.

After initialization, turn the main power switch off and then back on.

ALL RESET1 ....Resets all the settings to the factory

default settings.

ALL RESET2 ....Returns all settings to the factory default

settings except for the following items: LAN SETUP, RS-232C/LAN SELECT, ID No. SET, BAUD RATE, NETWORK, MAIL, SERVICE & SUPPORT, and SNMP (See page 25, and pages 49 to 52.)

ADJUSTMENT LOCK

You can disable operations on the monitor and the remote control unit that use buttons.

OFF ...Enables operation.

ON 1 ..Disables all operations other than turning power on/off and FUNCTION.

ON 2 ..Only the FUNCTION operation is enabled. Disables all operations other than FUNCTION (not even power on/off).

ADJUSTMENT LOCK TARGET

Sets the target to prohibit operation of with

ADJUSTMENT LOCK.

 

REMOTE CONTROL

Prohibits remote control

 

operation

MONITOR BUTTONS ...

Prohibits monitor switch

 

operation

BOTH

Prohibits remote control and

 

monitor switch operation

RS-232C/LAN

Specifies whether to allow control via RS-232C or LAN (see pages 33 and 45).

OSD DISPLAY

Shows/hides the menu, modes and messages. The FUNCTION screen cannot be hidden.

ON 1

Shows all menus, modes and messages.

ON 2

Hides messages automatically displayed

 

by the display. Shows messages during

 

operation.

OFF

Hides all menus, modes and messages.

LED

Specifies whether to light the power LED.

TEMPERATURE ALERT

Selects the notification method for an abnormal

temperature.

 

OFF

Do not notify about an abnormal

 

temperature.

OSD & LED .. When an abnormal temperature is

 

detected, the power LED flashes in red

 

and green alternately and the screen

 

displays a message: TEMPERATURE.

LED

When an abnormal temperature is

 

detected, the power LED flashes in red

 

and green alternately.

STATUS ALERT

Selects the notification method for a hardware error.

OFF

Do not notify about the error.

OSD & LED .. When a hardware error is detected, the

 

power LED flashes in red and the screen

 

displays a message: STATUS [xxxx].

LED

When a hardware error is detected, the

 

power LED flashes in red.

POWER BUTTON

Normally, leave this setting as MONITOR.

When using an optional part, if instruction appears, change the setting accordingly.

CONTROLLER INPUT

Normally, you do not need to change this setting. When using an optional part, if instruction appears, change the setting accordingly.

4. Press RETURN to return to the normal screen.

TIPS

When both abnormal temperature and hardware error are detected, the hardware error notification overrides.

If TEMPERATURE ALERT or STATUS ALERT is set to

OSD&LED, alert messages will appear even if the OSD DISPLAY is set to ON 2 or OFF.

If TEMPERATURE ALERT or STATUS ALERT is set to LED or OSD & LED, the LED lights even if the LED function is set to OFF.

E32

Image 32
Contents PN-R703 PN-R603 Information on Disposal for Users private households Information on Disposal for Business UsersEuropean Union Other Countries outside the EUBlue Neutral Brown Live Refer Servicing to Qualified Service PersonnelConnecting Plug to Mains Lead Dear Sharp Customer Safety Precautions Tips and Safety Instructions For the monitor in landscape orientation For the monitor in portrait orientationContents Supplied ComponentsNRear view Part NamesNFront view Return button See Size button See Part Names NRemote control unitSignal transmitter Connection with a PC or AV equipment Connecting Peripheral Equipment11 E Connecting Peripheral Equipment Connecting the Power Cord 13 EBinding Cables Preparing the Remote Control Unit Installing the batteriesRemote control operation range 15 ETurning Power On/Off Turning on the main powerTurning power on/off Status Status of the monitorDisabling power on/off operations NOperation modeNDate/time setting Turning Power On/OffBasic Operation Basic Operation NSwitching the screen size 19 EWide Zoom Normal Dot by DotMenu Items Displaying the menu screenNExample of operation NMenu screen display21 E Menu item detailsMenu Items NSCREENMenu Items NPICTURE 23 E Advanced3D-Y/C D-SUBVIDEO Display Color PatternNSETUP Menu Items NAUDIO25 E Menu Items NMONITOR 27 E Menu Items NMULTI/PIPMenu Items NOTHERS NZOOM2 Special Setting 29 ENDual screen display Menu Items NEnlargePower Menu Items NSCHEDULEDAY of the Week InputAdjustments for PC screen display NAutomatic adjustmentNScreen display for adjustment 31 EALL Reset Adjustment LockAdjustment Lock Target Temperature AlertCommunication procedure Controlling the Monitor with a PC RS-232C33 E PC connectionNCommunication interval NID numbers35 E Wait ←Setting of the Gamma user data RS-232C command table Power control/Input mode selectionHow to read the command table 37 EControlling the Monitor with a PC RS-232C Screen menu Picture menu39 E Audio menuControlling the Monitor with a PC RS-232C Setup menu 41 E Controlling the Monitor with a PC RS-232C Monitor menuControlling the Monitor with a PC RS-232C MULTI/PIP menu Landscape orientation Portrait orientation43 E Others menuCommands for setting of the Gamma user data OthersSettings to connect to a LAN Controlling the Monitor with a PC LAN45 E To set on the monitorSet up process Controlling the Monitor with a PC LAN To set from a PC47 E Controlling with a PCControlling the Monitor with a PC LAN Basic operationInformation User Name / Password 49 EDNS Server Address Auto Acquisition DNS ServerInstallation Information NAME/LOCATION Link ModeAuthentication Account Name / Password51 E Recipient E-MAIL AddressesCondition ConfirmationSnmp Setting Trap SettingTrap Setting of Authentication Error VersionAdvanced operation Command-based control 53 ETroubleshooting Troubleshooting 55 ESpecifications NProduct Specifications57 E NDimensional DrawingsSpecifications Specifications NPower management NDDC plug and play59 E Specifications NCompatible signal timing PCNCompatible signal timing AV NDisplayPort input terminal pins NPC/AV D-sub input terminal pinsNRS-232C input terminal pins NDVI-D output terminal pins NDisplayPort output terminal pinsSpecifications NRS-232C output terminal pins 61 EMounting Precautions For Sharp dealers and service engineers PN-R703R603 Me EN13A1
Related manuals
Manual 63 pages 19.95 Kb Manual 28 pages 3.2 Kb

PN-R703, PN-R603 specifications

The Sharp PN-R603 and PN-R703 are advanced commercial display monitors designed to deliver high-quality visuals and reliable performance for a variety of applications. These models are part of Sharp’s professional display lineup, making them ideal for environments such as retail stores, conference rooms, and control centers.

One of the standout features of the PN-R603 and PN-R703 is their exceptional image quality. Both models utilize Sharp’s innovative LCD technology, which ensures stunning color reproduction and clarity. With a native resolution of 1920 x 1080 pixels, these displays present clear, detailed images that are perfect for showcasing videos, presentations, or advertising content. The brightness of up to 700 cd/m² ensures visibility even in well-lit environments, making them practical for almost any setting.

Both models incorporate an ultra-slim design, allowing for seamless integration into any environment. Whether mounted on walls or placed on stands, the PN-R603 and PN-R703 maintain an elegant profile that enhances their surroundings. The frameless bezel design further maximizes the viewing area, creating an immersive experience for users.

In terms of connectivity, these displays offer a comprehensive suite of options. HDMI, DisplayPort, and VGA inputs facilitate quick and easy connections to various devices, including computers, media players, and video conferencing systems. This flexibility enables users to seamlessly switch between different formats and sources without hassle.

The PN-R603 and PN-R703 are not just visually appealing; they are also designed for durability and reliability. With a robust construction that supports continuous operation, these displays are well-suited for 24/7 use, making them ideal for mission-critical applications. The built-in cooling system ensures optimal performance while minimizing the risk of overheating, thus extending the lifespan of the units.

Additionally, both models come equipped with essential features such as integrated USB media playback, allowing users to display content directly from USB drives without requiring a connected PC. This feature streamlines the process of sharing information and makes setting up presentations easier.

In summary, the Sharp PN-R603 and PN-R703 exhibit a host of features that cater to the needs of professional environments. From their stunning display quality and versatile connectivity options to their durable construction and ease of use, these monitors represent a robust solution for businesses looking to enhance their visual communications. Whether for advertising, presentations, or information displays, the PN-R603 and PN-R703 stand out as reliable and effective choices.