Sharp PN-R703 47 E, Controlling with a PC, Controlling the Monitor with a PC LAN, Basic operation

Page 47

5. Click on “LAN SETUP” under NETWORK.

6. Specify the “DHCP CLIENT”, “IP ADDRESS”,etc.

Controlling the Monitor with a PC (LAN)

Controlling with a PC

■ Basic operation

You use Internet Explorer on a PC on the LAN to control the monitor.

1.Launch Internet Explorer on the PC.

2.In the “Address” box, type “http://” followed by your monitor’s IP address followed by “/”, then press the Enter key.

You can confirm the IP address with the DISPLAY function.

When prompted to enter a user name and password, type the user name and password that you specified in the security settings (see page 49), and click [OK].

3.You can check, control, and change the monitor’s status and settings by clicking the menu items on the left side of the screen.

DHCP CLIENT

If your LAN has a DHCP server and you wish to obtain an address automatically, change this setting to “ON”.

To set the address manually, set this to “OFF”.

IP ADDRESS

If the DHCP CLIENT is set to “OFF”, specify an IP address.

SUBNET MASK

If the DHCP CLIENT is set to “OFF”, specify the subnet mask.

DEFAULT GATEWAY

If the DHCP CLIENT is set to “OFF”, specify the default gateway. If you are not using a default gateway, specify “0.0.0.0”.

7.When the setting is changed, click [Apply].

8.Check the message and click [OK].

9.Exit Internet Explorer.

10.Restore the PC’s IP address jotted in Step 6, “(2) Specifying the PC’s IP address”.

11.Connect the monitor and the PC to the LAN.

Caution

Wait 10 seconds after clicking [OK] before proceeding.

When operating using the remote control unit or similar, click [Refresh].

TIPS

When the IP address is set manually, the IP addresses of the monitor connected to the RS-232C output terminal and the daisy chain of connected monitors that follows can be assigned automatically. (See page 25.)

If you see an [Apply] button next to a setting, click it after you change that setting.

TIPS

See pages 48 to 52 for details on each setting.

If you click [Refresh] before the screen finishes updating the current display, the “Server Busy Error” will appear.

Wait for a moment before operating your monitor again.

You cannot operate the monitor while it is warming up.

If “DHCP CLIENT” is set to “ON”, press DISPLAY on the remote control unit two times and then check the monitor’s IP address.

47 E

Image 47
Contents PN-R703 PN-R603 Other Countries outside the EU Information on Disposal for Users private householdsInformation on Disposal for Business Users European UnionBlue Neutral Brown Live Refer Servicing to Qualified Service PersonnelConnecting Plug to Mains Lead Dear Sharp Customer Safety Precautions Tips and Safety Instructions For the monitor in portrait orientation For the monitor in landscape orientationSupplied Components ContentsNRear view Part NamesNFront view Return button See Size button See Part Names NRemote control unitSignal transmitter Connection with a PC or AV equipment Connecting Peripheral Equipment11 E Connecting Peripheral Equipment 13 E Connecting the Power CordBinding Cables 15 E Preparing the Remote Control UnitInstalling the batteries Remote control operation rangeStatus Status of the monitor Turning Power On/OffTurning on the main power Turning power on/offTurning Power On/Off Disabling power on/off operationsNOperation mode NDate/time settingBasic Operation Dot by Dot Basic Operation NSwitching the screen size19 E Wide Zoom NormalNMenu screen display Menu ItemsDisplaying the menu screen NExample of operationNSCREEN 21 EMenu item details Menu ItemsMenu Items NPICTURE Display Color Pattern 23 EAdvanced 3D-Y/C D-SUBVIDEOMenu Items NAUDIO NSETUP25 E Menu Items NMONITOR Menu Items NMULTI/PIP 27 EMenu Items NOTHERS Menu Items NEnlarge NZOOM2 Special Setting29 E NDual screen displayInput PowerMenu Items NSCHEDULE DAY of the Week31 E Adjustments for PC screen displayNAutomatic adjustment NScreen display for adjustmentTemperature Alert ALL ResetAdjustment Lock Adjustment Lock TargetPC connection Communication procedureControlling the Monitor with a PC RS-232C 33 ENID numbers NCommunication intervalWait ← 35 ESetting of the Gamma user data 37 E RS-232C command tablePower control/Input mode selection How to read the command tablePicture menu Controlling the Monitor with a PC RS-232C Screen menuAudio menu 39 EControlling the Monitor with a PC RS-232C Setup menu Controlling the Monitor with a PC RS-232C Monitor menu 41 ELandscape orientation Portrait orientation Controlling the Monitor with a PC RS-232C MULTI/PIP menuOthers menu 43 EOthers Commands for setting of the Gamma user dataTo set on the monitor Settings to connect to a LANControlling the Monitor with a PC LAN 45 EControlling the Monitor with a PC LAN To set from a PC Set up processBasic operation 47 EControlling with a PC Controlling the Monitor with a PC LANInformation DNS Server User Name / Password49 E DNS Server Address Auto AcquisitionAccount Name / Password Installation Information NAME/LOCATIONLink Mode AuthenticationConfirmation 51 ERecipient E-MAIL Addresses ConditionVersion Snmp SettingTrap Setting Trap Setting of Authentication Error53 E Advanced operation Command-based controlTroubleshooting 55 E TroubleshootingNProduct Specifications Specifications57 E NDimensional DrawingsSpecifications NDDC plug and play Specifications NPower management59 E Specifications NCompatible signal timing PCNCompatible signal timing AV NDisplayPort input terminal pins NPC/AV D-sub input terminal pinsNRS-232C input terminal pins 61 E NDVI-D output terminal pinsNDisplayPort output terminal pins Specifications NRS-232C output terminal pinsMounting Precautions For Sharp dealers and service engineers PN-R703R603 Me EN13A1
Related manuals
Manual 63 pages 19.95 Kb Manual 28 pages 3.2 Kb

PN-R703, PN-R603 specifications

The Sharp PN-R603 and PN-R703 are advanced commercial display monitors designed to deliver high-quality visuals and reliable performance for a variety of applications. These models are part of Sharp’s professional display lineup, making them ideal for environments such as retail stores, conference rooms, and control centers.

One of the standout features of the PN-R603 and PN-R703 is their exceptional image quality. Both models utilize Sharp’s innovative LCD technology, which ensures stunning color reproduction and clarity. With a native resolution of 1920 x 1080 pixels, these displays present clear, detailed images that are perfect for showcasing videos, presentations, or advertising content. The brightness of up to 700 cd/m² ensures visibility even in well-lit environments, making them practical for almost any setting.

Both models incorporate an ultra-slim design, allowing for seamless integration into any environment. Whether mounted on walls or placed on stands, the PN-R603 and PN-R703 maintain an elegant profile that enhances their surroundings. The frameless bezel design further maximizes the viewing area, creating an immersive experience for users.

In terms of connectivity, these displays offer a comprehensive suite of options. HDMI, DisplayPort, and VGA inputs facilitate quick and easy connections to various devices, including computers, media players, and video conferencing systems. This flexibility enables users to seamlessly switch between different formats and sources without hassle.

The PN-R603 and PN-R703 are not just visually appealing; they are also designed for durability and reliability. With a robust construction that supports continuous operation, these displays are well-suited for 24/7 use, making them ideal for mission-critical applications. The built-in cooling system ensures optimal performance while minimizing the risk of overheating, thus extending the lifespan of the units.

Additionally, both models come equipped with essential features such as integrated USB media playback, allowing users to display content directly from USB drives without requiring a connected PC. This feature streamlines the process of sharing information and makes setting up presentations easier.

In summary, the Sharp PN-R603 and PN-R703 exhibit a host of features that cater to the needs of professional environments. From their stunning display quality and versatile connectivity options to their durable construction and ease of use, these monitors represent a robust solution for businesses looking to enhance their visual communications. Whether for advertising, presentations, or information displays, the PN-R603 and PN-R703 stand out as reliable and effective choices.