Sharp PN-R603, PN-R703 Controlling the Monitor with a PC LAN To set from a PC, Set up process

Page 46

Controlling the Monitor with a PC (LAN)

■ To set from a PC

When the monitor is connected to a PC, LAN settings can be configured via PC.

Set up process

(1)Connect your monitor to a PC

(2)Specify the PC’s IP address

(3)Configure the monitor’s LAN settings

(1) Connecting your monitor to a PC

Connect a commercially available crossover LAN cable (UPT cable, Category 5) to the LAN port on the PC and this monitor.

LAN terminal

 

 

 

PC

 

To LAN terminal

 

 

 

 

 

 

 

 

 

 

 

 

LAN cable (commercially available, crossover)

(2) Specifying the PC’s IP address

To configure the monitor’s LAN settings, you must temporarily change the settings on the PC.

This explanation is based on Windows 7.

1.Log on to the PC with an administrator account.

2.Click [Start], and then click “Control Panel”.

3.Click “View network status and tasks” in “Network and Internet”.

In “Classic View”, click “Network and Sharing Center”.

4.Click “Local Area Connection” and then “Properties”.

5.Click “Internet Protocol Version 4 (TCP/IPv4)” and then “Properties”.

6.Make a note of the current IP address, subnet mask, and default gateway settings.

Make sure you write this information now as you will be changing the IP address, subnet mask, and default gateway settings back to these settings afterwards.

7.Temporarily change the IP address and subnet mask.

To access the monitor as it is shipped from the factory, set as follows.

IP Address: 192.168.150.1

Subnet Mask: 255.255.255.0

Default Gateway: (leave blank)

8. Click [OK] and then reboot the PC.

TIPS

• This monitor is factory preset as shown below. (When DHCP CLIENT is set to OFF)

IP Address

: 192.168.150.2

Subnet Mask

: 255.255.255.0

Default Gateway

: 0.0.0.0

(3)Configuring the monitor’s LAN settings

Access the monitor using Internet Explorer.

Controlling the monitor

1.Turn the power ON to the monitor.

2.Set RS-232C/LAN SELECT of COMMUNICATION SETTING on the SETUP menu to LAN.

3.Set DHCP CLIENT of LAN SETUP of COMMUNICATION SETTING on the SETUP menu to OFF.

PC operation

4.Launch Internet Explorer, in the “Address” box type “http://192.168.150.2/” and press the Enter key.

E46

Image 46
Contents PN-R703 PN-R603 European Union Information on Disposal for Users private householdsInformation on Disposal for Business Users Other Countries outside the EUConnecting Plug to Mains Lead Refer Servicing to Qualified Service PersonnelBlue Neutral Brown Live Dear Sharp Customer Safety Precautions Tips and Safety Instructions For the monitor in landscape orientation For the monitor in portrait orientationContents Supplied ComponentsNFront view Part NamesNRear view Signal transmitter Part Names NRemote control unitReturn button See Size button See 11 E Connecting Peripheral EquipmentConnection with a PC or AV equipment Connecting Peripheral Equipment Connecting the Power Cord 13 EBinding Cables Remote control operation range Preparing the Remote Control UnitInstalling the batteries 15 ETurning power on/off Turning Power On/OffTurning on the main power Status Status of the monitorNDate/time setting Disabling power on/off operationsNOperation mode Turning Power On/OffBasic Operation Wide Zoom Normal Basic Operation NSwitching the screen size19 E Dot by DotNExample of operation Menu ItemsDisplaying the menu screen NMenu screen displayMenu Items 21 EMenu item details NSCREENMenu Items NPICTURE 3D-Y/C D-SUBVIDEO 23 EAdvanced Display Color PatternNSETUP Menu Items NAUDIO25 E Menu Items NMONITOR 27 E Menu Items NMULTI/PIPMenu Items NOTHERS NDual screen display NZOOM2 Special Setting29 E Menu Items NEnlargeDAY of the Week PowerMenu Items NSCHEDULE InputNScreen display for adjustment Adjustments for PC screen displayNAutomatic adjustment 31 EAdjustment Lock Target ALL ResetAdjustment Lock Temperature Alert33 E Communication procedureControlling the Monitor with a PC RS-232C PC connectionNCommunication interval NID numbers35 E Wait ←Setting of the Gamma user data How to read the command table RS-232C command tablePower control/Input mode selection 37 EControlling the Monitor with a PC RS-232C Screen menu Picture menu39 E Audio menuControlling the Monitor with a PC RS-232C Setup menu 41 E Controlling the Monitor with a PC RS-232C Monitor menuControlling the Monitor with a PC RS-232C MULTI/PIP menu Landscape orientation Portrait orientation43 E Others menuCommands for setting of the Gamma user data Others45 E Settings to connect to a LANControlling the Monitor with a PC LAN To set on the monitorSet up process Controlling the Monitor with a PC LAN To set from a PCControlling the Monitor with a PC LAN 47 EControlling with a PC Basic operationInformation DNS Server Address Auto Acquisition User Name / Password49 E DNS ServerAuthentication Installation Information NAME/LOCATIONLink Mode Account Name / PasswordCondition 51 ERecipient E-MAIL Addresses ConfirmationTrap Setting of Authentication Error Snmp SettingTrap Setting VersionAdvanced operation Command-based control 53 ETroubleshooting Troubleshooting 55 ESpecifications NProduct SpecificationsSpecifications NDimensional Drawings57 E Specifications NPower management NDDC plug and playNCompatible signal timing AV Specifications NCompatible signal timing PC59 E NRS-232C input terminal pins NPC/AV D-sub input terminal pinsNDisplayPort input terminal pins Specifications NRS-232C output terminal pins NDVI-D output terminal pinsNDisplayPort output terminal pins 61 EMounting Precautions For Sharp dealers and service engineers PN-R703R603 Me EN13A1
Related manuals
Manual 63 pages 19.95 Kb Manual 28 pages 3.2 Kb

PN-R703, PN-R603 specifications

The Sharp PN-R603 and PN-R703 are advanced commercial display monitors designed to deliver high-quality visuals and reliable performance for a variety of applications. These models are part of Sharp’s professional display lineup, making them ideal for environments such as retail stores, conference rooms, and control centers.

One of the standout features of the PN-R603 and PN-R703 is their exceptional image quality. Both models utilize Sharp’s innovative LCD technology, which ensures stunning color reproduction and clarity. With a native resolution of 1920 x 1080 pixels, these displays present clear, detailed images that are perfect for showcasing videos, presentations, or advertising content. The brightness of up to 700 cd/m² ensures visibility even in well-lit environments, making them practical for almost any setting.

Both models incorporate an ultra-slim design, allowing for seamless integration into any environment. Whether mounted on walls or placed on stands, the PN-R603 and PN-R703 maintain an elegant profile that enhances their surroundings. The frameless bezel design further maximizes the viewing area, creating an immersive experience for users.

In terms of connectivity, these displays offer a comprehensive suite of options. HDMI, DisplayPort, and VGA inputs facilitate quick and easy connections to various devices, including computers, media players, and video conferencing systems. This flexibility enables users to seamlessly switch between different formats and sources without hassle.

The PN-R603 and PN-R703 are not just visually appealing; they are also designed for durability and reliability. With a robust construction that supports continuous operation, these displays are well-suited for 24/7 use, making them ideal for mission-critical applications. The built-in cooling system ensures optimal performance while minimizing the risk of overheating, thus extending the lifespan of the units.

Additionally, both models come equipped with essential features such as integrated USB media playback, allowing users to display content directly from USB drives without requiring a connected PC. This feature streamlines the process of sharing information and makes setting up presentations easier.

In summary, the Sharp PN-R603 and PN-R703 exhibit a host of features that cater to the needs of professional environments. From their stunning display quality and versatile connectivity options to their durable construction and ease of use, these monitors represent a robust solution for businesses looking to enhance their visual communications. Whether for advertising, presentations, or information displays, the PN-R603 and PN-R703 stand out as reliable and effective choices.