Basic adjustment
●AV standard
Allows you to set the AV standard of the connected device to AV or AVS.
Normally you leave the setting to Automatic. If the standard of the connected device is not detected automatically, you can select the correct standard.
NOTE
•Ask your dealer or consult the operating manual of the connected device if necessary.
●Signal type
Allows you to set the signal type of the device connected to AV or AVS.
●Allow switching voltage
If this function is activated, the video and audio of an external device connected to the AV connector (not in AVS) will be automatically reproduced on all TV broadcast sites when reproduction is started up, provided that the external unit supplies a switching voltage.
●HDMI-CEC
Here you can make further settings for comfortably linking external devices to the TV sets.
●Remote TV switch on via HDMI-CEC
Here you can select whether the TV set is to switch on automatically from standby mode, if
●HDMI-CEC functionality
You can allow or forbid the automatic communication between the TV set and linked external devices.
Channel list
Selecting the channel
you want to watch
1 Press OK and the list of tuned channels will be displayed.
2 Use ◄/► to select the channel you want to watch and press OK.
You can watch overall station list or a personal list of channels by pressing ▲.
Channel information display
(DVB-T /DVB-C only)
You can display the channel information that you are watching at this moment by pressing pon the remote control unit.
In the left lower corner you can see the number and name of the channel, the transmission time and (if available) the title of the current programme. The bar (if available) indicates the progress of the current programme.
In the right lower corner, the programme info is displayed additionally for DVB channels.
29