Connecting external devices
SCART connection | Speaker/amplifier connector | |||||
Example of connectable devices | Example of connectable devices | |||||
● VCR ● Decoder | ● Connecting an amplifier with digital audio | |||||
● DVD player/recorder | ||||||
input | ||||||
|
|
| ||||
SCART cable | Connect an amplifier with external speakers as shown | |||||
|
|
| ||||
|
|
| below. | |||
|
|
| RCA Audio cable | |||
|
|
| ||||
|
|
| ||||
|
|
|
|
|
|
SCART
Decoder
NOTE
•In cases when the decoder needs to receive a signal from the TV, make sure you select the appropriate input terminal to which the decoder is connected in “AV selection” (Page 17).
Amplifier with RCA digital audio input
●After connecting
Digital audio output setting
After connecting an amplifier with RCA digital audio input as shown, you should set an audio output format compatible with the programme you are watching or the device connected.
Press MENU and go to Setup → Sound
→SPDIF mode → select PCM or Dolby Digital.
NOTE
•When you set this to Dolby Digital, and you receive the Dolby Digital or Dolby Digital Plus audio formats, Dolby Digital audio is output. Otherwise, PCM audio is output.
When you set this to PCM, PCM audio is output no matter what audio formats you receive.
43