Turning the TV on/off
Turning on/off the power
•To turn on the power
Press POWER on the TV. (After a few seconds, an image appears with sound.)
•To turn off the power
Switch it off by pressing POWER on the TV.
Checking Signal information
If you install a
Standby mode
•To standby mode
If the TV is switched on, you can switch it to standby by pressing POWER on the remote control.
•Switching on from standby
From standby, press POWER on the remote control.
NOTE
•If you are not going to use this TV for a long period of time, be sure to remove the AC cord from the AC outlet.
•Minor power is consumed when the unit is in standby mode.
Initial auto installation
When the TV powers on for the first time after purchase, the initial auto installation wizard appears. Follow the menus and make the necessary settings one after another.
1Press POWER on the TV.
• The initial auto installation wizard appears.
2Press a/b to select your country channels listed
on the screen, and then press ENTER.
Press a/b to select “HOME” or “STORE”, and then press ENTER.
HOME:
•“STANDARD” will be the default value for the “AV mode” setting.
STORE:
•“DYNAMIC (FIXED)” will be the default value for the “AV mode” setting. If the “AV mode” is changed, the TV will automatically switch back to “DYNAMIC (FIXED)” when there is no further change to TV setting for 30 minutes.
•The confirmation screen appears only when selecting “STORE”.
Press a/b to select “Yes” or “No”.
•To change the STORE mode to HOME mode, please refer to page 16 to reset the unit.
Press a/b to select “DTV”, “ATV” or “DTV + ATV”, and then press ENTER.
•Auto installation will be executed.
•You do not need to do anything during the auto search.
ATV/DTV
1Press MENU and the MENU screen displays.
2 Press c/d to select “
” (Programme setup).
3Press a/b to select “Digital setting”, and then press ENTER.
4Press a/b to select “Signal Information”, and then press ENTER.
• The “Signal Information” screen will appear.
10