Option menu
|
| Output volume select | |
| 4 | Input select | |
| 4 | Audio select | |
|
| Auto volume | |
|
| Digital audio output | |
| 4 | Speaker selection | |
|
| Audio only | |
Option | 4 | Colour system | |
4 | Fine Sync. | ||
|
HDMI (Digital)
DVD player/PC
HDMI+Analogue
Output volume select
Allows you to select what controls the audio output.
Selected item |
| Description |
|
|
|
Fixed | • | Sound via speakers is adjusted with |
|
| VOL k/l on the remote control unit |
|
| or the TV. |
| • | Sound via the AUDIO OUT terminal is |
|
| not adjustable and constantly outputs. |
|
|
|
Variable | • | Sound via the AUDIO OUT terminal |
|
| is adjusted with VOL k/l on the |
|
| remote control unit or the TV. |
| • | Sound via speakers is muted. |
|
|
|
NOTE
•When “Output volume select” is set to “Variable”, all Audio menu item cannot be adjusted.
Input select
For setting the signal type of external equipment.
Input source | Selectable item |
|
|
INPUT4 | Component, Video |
|
|
Audio select (HDMI input mode only)
You must select HDMI+Analogue if uses the AUDIO IN (R/L) jack for analogue audio input when using INPUT 2 (HDMI) terminal.
Option |
| Description |
|
|
|
HDMI (Digital) | • | Select “HDMI (Digital)” if the Devices |
|
| (DVD, Blu ray Player, Set Top Box or |
|
| etc) is connected using HDMI cable to |
|
| INPUT 2 (HDMI) terminal. |
|
|
|
HDMI+Analogue | • | Select “HDMI+Analogue” if the |
|
| Devices (PC or etc) is connected using |
|
| DVI/HDMI convert cable to INPUT 2 |
|
| (HDMI) terminal and AUDIO IN (R/L) |
|
| jack is used to input Analogue Audio |
|
| Signals. |
|
|
|
PC
Auto volume
Different sound sources, fairly often do not have the same volume level, for example the changing from movie to the advertisements. Auto volume solves this problem and equalises the volume levels. (On, Off)
Digital audio output
This function allows you to select your favourite audio output system. (PCM, Auto, Off)
Speaker selection
You can choose to listen to the external amplifier audio only. (On, Off)
NOTE
•This function only available when “Link operation” is set to “On”.
•You need to use CEC compatible amplifier to control external speaker volume.
Audio only
When listening to music from a music programme, you can set the display off and enjoy audio only.
Selected item | Description |
|
|
On | Audio is output without screen image. |
|
|
Off | Both screen images and audio are |
| output. |
|
|
NOTE
•When you make operations that change the picture on the TV such as by changing the input source, the Audio only function is set to “Off”.
Colour system
You can change the colour system to one that is compatible with the image on the screen. (Auto, PAL, SECAM, NTSC 3.58, NTSC 4.43,
NOTE
•If “Auto” is selected, colour system for each channel is automatically set. If an image does not display clearly, select another colour system (e.g. PAL, NTSC 4.43).
•“Colour system” is selectable only when inputting a composite signal.
17