I | Investigate the layout of your vehicle thoroughly before drilling or |
N | cutting. Take care when you work near the gas tank, gas lines, hydraulic |
S | lines, electrical components and electrical wiring. Do not use the equipment |
T | unmounted. Attach this system securely to prevent damage, particularly in |
A | the event of an accident or aggressive driving. Do not mount the system so |
L | that wire connections are unprotected or are subjected to pinching or damage |
L | from nearby objects. Before connecting or disconnecting power connections |
A | at the system power terminals, disconnect the +12V DC wire at the battery |
T | end. Confirm that your source unit and other equipment are turned off while |
I | connecting the input terminals. If you need to replace the power fuse, replace |
O | it only with a fuse identical to the provided fuse. Using a fuse of different type |
N | or rating may result in damage to the system, which is not covered by the |
C | manufacturer’s warranty. Do not install any product where it may be subject- |
O | ed to excessive heat, moisture and dust or where it may be repeatedly kicked, |
N | brushed or bumped. Make absolutely sure that the terminals for the products |
T | are connected to the proper inputs and outputs from the music source. Never |
I | run the wiring on the outside of the vehicle or under it where it can be dam- |
N | aged by road hazards or any moving parts of the vehicle. Use existing wire |
U | channels, sills, panels and molding strips inside the vehicle to hide the wiring |
E | for safety and a neat appearance. |
D |
|
DISCLAIMER
IMPORTANT: Never cut any metal that is an integral part of the vehicle’s safety or structural support system. If you are unsure, it is best to have the product professionally installed by an Authorized Alphasonik Dealer.
Never sacrifice your safety for sound.
9