Mounting Options

CPX Speakers

Pole Mounting – The CPX Speakers also include a pole mount option. The pole mount socket located on the bottom of the speaker may be used to secure the speaker to a speaker tri-pod, such as the American Audio® SPS-1B as illustrated on the left. Always be sure to follow the guidelines listed below when pole mounting your speaker;

•Always be sure the stand is designed to support the weight of the speaker

•In outdoor situations that are prone to windy conditions and strong wind gust, be sure to use sandbags as additional tri-pod support, this will greatly reduce the risk of tipping

•Do not stack speakers on top of each other when mounting on

a tri-pod. Only one speaker should be mounted to a tri-pod at one time.

•Always position the tri-pod legs away from foot traffic

•Extend the tri-pod legs to their fully extended position to avoid accidental tipping

•Observe and follow all safety guidelines and regulations specified by the tri-pod’s manufacturer

•Be sure the tri-pod is situated on a flat, level, and stable surface

•Always tighten all tri-pod locks.