Jensen VM9512 Parking Brake, Monitor Movement Mechanism, Parameter Adjustment Procedure

Page 17

VM9512

Parameter Adjustment Procedure

1.Enter Picture Quality Setting Mode:

Press the PIC button (24) on the remote control or press and hold the WIDE/PICTURE button (22) on the moni- tor.

2.Select Item to Set:

Use the up/down joystick buttons to select “BRIGHT” or “CONTRAST”.

3.Set Parameters:

Use the left/right joystick buttons to modify the settings.

4.Exit Picture Quality Setting Mode:

Press the PIC button on the remote control or the WIDE/ PICTURE button on the monitor

Parking Brake

Parking Brake Inhibit

When the pink "Parking" wire is connected to the vehicle brake switch, the front TFT monitor will display video only when the parking brake sequence is engaged. Before starting the parking brake sequence, the radio must be on with the video media disc inserted and playing.

Parking Brake Sequence

There are two situations that can start the Parking Brake Sequence (this is the preferred method). The timing window is between 3 ~ 5 seconds.

•Parking brake is engaged (on) when the vehicle is started or the accessory/ignition is turned on. To activate video, the following sequence of events must be completed:

a.Release parking brake for 3 ~ 5 seconds.

b.Reapply parking brake.

c.Video should be displayed on the TFT monitor within 1 ~ 2 seconds.

•Parking break is disengaged (off) when the vehicle is started or the accessory/ignition is turned on. To activate video, the following sequence of events must be completed:

a.Set parking brake for 3 ~ 5 seconds.

b.Release parking brake for 3 ~ 5 seconds.

c.Reapply parking brake.

d.Video should be displayed on the TFT monitor within 1 ~ 2 seconds.

Monitor Movement Mechanism

If an obstruction occurs in the monitor path, the following protective measurements can be executed to prevent damage to the mechanism or monitor:

Table 3: Monitor Protective Measures

Obstruction

Self

OPEN Button

Power

Protection

Pressed

Reconnected

 

 

 

 

 

 

 

 

 

Monitor load-

Unit stops at

Monitor fully

Monitor is auto-

ing out hori-

obstruction

extended hori-

matically

zontally

point

zontally

loaded into unit

Monitor load-

Unit stops at

Monitor fully

Monitor is auto-

ing in hori-

obstruction

extended hori-

matically

zontally

point

zontally

loaded into unit

Monitor load-

Unit stops at

Monitor swiv-

Monitor swiv-

ing out verti-

obstruction

els back to the

els back to the

cally

point

unit

unit

Monitor load-

Unit stops at

Monitor swiv-

Monitor swiv-

ing in verti-

obstruction

els back to the

els back to the

cally

point

unit

unit

After the protective procedure is executed, normal operation is resumed by pressing the OPEN button (1) or disconnecting and reconnecting the power.

13

Page 16 Page 18
Image 17
Page 16 Page 18
Contents VM9512 Page Contents Page Preparation FeaturesTools and Supplies Disconnecting the BatteryOptional Equipment Wiring Diagram To Head Unit Pre-installation InstallationWiring Final InstallationService at 1-800-323-4815 for assistance ANTI-THEFT Feature10 11 Controls and IndicatorsButton Operation Right joystick Pause/Play/EnterUp joystick TFT Display RearRemote Control Preset PowerMenu TitleBand NAV SetupPIC OpenUsing the TFT Monitor Parking Brake Parameter Adjustment ProcedureMonitor Movement Mechanism Parking Brake InhibitOperating Instructions PIP Disc System ResetMULTI-ZONE Operation Connecting the Rear Zone Touch ScreenChanging the Rear Zone Source Turning the Rear Screen OffSetup Setup MenuAccessing Menu Items Adjusting a FeatureRDS Sub-menu Features Bluetooth Sub-menu FeaturesRating Sub-menu Features DivX Sub-Menu FeaturesVOL Sub-menu Features Exiting the System Setup MenuTS Cal Screen Calibration USB AUXTuner Operation Preview Scan PS Auto Store ASLocal Radio Station Seeking LOC Recalling a StationSatellite Radio Operation SAT Category Guide ModeDVD/VCD Video Operation Direct Chapter / Track Selection Moving Through ChaptersViewing an Alternate Picture Angle DVD Only ZoomingGeneral Disc Information Symbol MeaningSymb 12cm Disc Properties Max Play Time MpegCD Player User Interface DVD/CD Audio OperationTrack / ## Direct Track EntryMP3/WMA Media and File Requirements MP3/WMA OperationLoading an SD Card Loading a USB DevicePlaying MP3/WMA Files MP3 User InterfaceControlling MP3/WMA Disc Playback Controlling Your iPod IPod User InterfaceDirect Track/File Entry IPodAbout Bluetooth Bluetooth OperationBluetooth User Interface Hands Free Profile HFPManaging Incoming Calls ReconnectingMaking an Outgoing Call Call TransferAdvanced Audio Distribution Profile A2DP Bluetooth SetupPhone Book Auto AnswerProblem Cause Corrective Action TroubleshootingTFT Monitor TunerMP3 Error MessagesMessage Displayed Cause Corrective Action Care and Maintenance Specifications Do not Return this Product to the Store Limited Warranty

VM9512 specifications

The Jensen VM9512 is an innovative multimedia receiver designed to enhance the in-car entertainment experience while integrating modern technology for seamless connectivity and user interaction. One of its key features is the 6.2-inch touchscreen display, which provides a clear and responsive interface for easy navigation. The screen is designed to ensure visibility in various lighting conditions, allowing users to operate the system comfortably.

The VM9512 supports a wide range of media formats, including CDs, DVDs, and digital files, making it versatile for different audio and video needs. It features built-in Bluetooth technology, enabling hands-free calling and audio streaming from compatible devices, which enhances safety and convenience while driving. Additionally, the unit comes equipped with AM/FM radio, providing access to a variety of broadcast stations.

Another standout characteristic of the Jensen VM9512 is its compatibility with Apple CarPlay and Android Auto, allowing users to integrate their smartphones seamlessly. This functionality enables drivers to access navigation, music, and communication apps directly from the receiver's interface, promoting a safer driving experience by minimizing distractions.

The VM9512 also includes USB ports and an auxiliary input, allowing for direct connections to a variety of devices, including USB flash drives and external audio players. This feature expands the range of media options available, ensuring that users can enjoy their favorite content on the go.

In terms of audio performance, the Jensen VM9512 is equipped with a powerful built-in amplifier and customizable equalizer settings. This enables users to fine-tune their listening experience to match their preferences, whether they enjoy bass-heavy tracks or crystal-clear vocals. The device also supports multiple speaker configurations, allowing for extensive sound system customization.

Installation is user-friendly, with a standard double-DIN form factor that fits most vehicle dashboards. The VM9512's design is not only functional but also aesthetically appealing, enhancing the overall look of the vehicle's interior.

Overall, the Jensen VM9512 is a feature-rich multimedia receiver that combines modern technology with user-friendly design, making it an excellent choice for anyone looking to upgrade their in-car entertainment system. With its blend of audio features, connectivity options, and ease of use, this receiver stands out in a competitive market, catering to diverse consumer needs.
Top Page Image Contents