Jensen VM9512 MP3/WMA Operation, MP3/WMA Media and File Requirements, Loading an SD Card

Page 33

VM9512

MP3/WMA OPERATION

Instructions for TFT control and Insert/Eject are the same for DVD and MP3 operation. Please see the DVD/Disc Video Operation section for information about these topics.

MP3/WMA Media and File

Requirements

This player allows you to play back MP3 and WMA files recorded onto CD-R/RWs, DVD+R/RWs, and DVD-R/RWs. For CD-RW discs, please make sure it is formatted using the full method and not the quick method to prevent illegal disc operation.

Up to 1500 songs/files can be burned onto a disc for a MEGA DVD music mix. Do not exceed this number of songs/files or disc readability problems may occur.

MP3 Format Compatibility

The file naming formats listed below are compatible with this unit:

•ISO 9660 – file name: 12 characters, file extension: 3 characters

•ISO 9660 – file name: 31 characters, file extension: 3 characters

•Joliet – 64 characters

If the file or folder name does not conform to ISO 9660 file system standards, it may not be displayed or played back correctly. Use the following settings when compressing audio data for your MP3 disc:

•Transfer Bit Rate: 128kbps

•Sampling Frequency: 48kHz

When recording MP3 up to the maximum disc capacity, disable additional writing. For recording on an empty disc up to maximum disc capacity, use the "Disc at once" setting.

MP3 Playing Order

When selected for play, files and folders (Folder Search, File Search or Folder Select) are accessed in the order they were written by the CD writer. As a result, the order in which they are expected to be played may not match the order in which they are actually played. You may be able to set the order in which MP3/WMA files are to be played by writing them onto a medium such as a CD-R with their file names beginning with play sequence numbers such as "01" to "99".

For example, a medium with the following folder/file hierarchy is subject to Folder Search, File Search or Folder Select, as shown below.

The VM9512 player will only recognize three folder levels and does not display folders containing only other folders. In the example above, the unit will display folders 3, 4, 6, and 8, but not 2 and 7 since they do not contain any tracks directly.

Folder 5 is not recognized at all since it is at the fourth level.

Loading an SD Card

Insert the SD card into the SD slot (21) on the front of the radio. The unit will read the audio media files on the card automatically.

To remove the card, first press the SRC button (6) to switch to another mode and stop SD playback. Pull the SD card out to remove it.

Loading a USB Device

1.Locate the USB jack located on the MediaLink4.

MediaLink

3.5mm - Audio VIDEO

LEFT

RIGHT

USB JACK

2.Insert the USB device into the USB jack. The unit will read the audio media files on the USB device automatically.

To remove the USB device, press the SRC button (6) to switch to another mode and then remove the USB device from the USB jack.

29

Page 32 Page 34
Image 33
Page 32 Page 34
Contents VM9512 Page Contents Page Preparation FeaturesDisconnecting the Battery Optional EquipmentTools and Supplies Wiring Diagram To Head Unit Pre-installation InstallationWiring Final InstallationService at 1-800-323-4815 for assistance ANTI-THEFT FeatureControls and Indicators Button Operation10 11 Right joystick Pause/Play/EnterUp joystick TFT Display RearRemote Control Preset PowerMenu TitleBand NAV SetupPIC OpenUsing the TFT Monitor Parking Brake Parameter Adjustment ProcedureMonitor Movement Mechanism Parking Brake InhibitOperating Instructions PIP Disc System ResetMULTI-ZONE Operation Connecting the Rear Zone Touch ScreenChanging the Rear Zone Source Turning the Rear Screen OffSetup Setup MenuAccessing Menu Items Adjusting a FeatureRDS Sub-menu Features Bluetooth Sub-menu FeaturesRating Sub-menu Features DivX Sub-Menu FeaturesVOL Sub-menu Features Exiting the System Setup MenuTS Cal Screen Calibration USB AUXTuner Operation Preview Scan PS Auto Store ASLocal Radio Station Seeking LOC Recalling a StationSatellite Radio Operation SAT Category Guide ModeDVD/VCD Video Operation Direct Chapter / Track Selection Moving Through ChaptersViewing an Alternate Picture Angle DVD Only ZoomingGeneral Disc Information Symbol MeaningSymb 12cm Disc Properties Max Play Time MpegCD Player User Interface DVD/CD Audio OperationTrack / ## Direct Track EntryMP3/WMA Media and File Requirements MP3/WMA OperationLoading an SD Card Loading a USB DeviceMP3 User Interface Controlling MP3/WMA Disc PlaybackPlaying MP3/WMA Files Controlling Your iPod IPod User InterfaceDirect Track/File Entry IPodAbout Bluetooth Bluetooth OperationBluetooth User Interface Hands Free Profile HFPManaging Incoming Calls ReconnectingMaking an Outgoing Call Call TransferAdvanced Audio Distribution Profile A2DP Bluetooth SetupPhone Book Auto AnswerProblem Cause Corrective Action TroubleshootingTFT Monitor TunerError Messages Message Displayed Cause Corrective ActionMP3 Care and Maintenance Specifications Do not Return this Product to the Store Limited Warranty

VM9512 specifications

The Jensen VM9512 is an innovative multimedia receiver designed to enhance the in-car entertainment experience while integrating modern technology for seamless connectivity and user interaction. One of its key features is the 6.2-inch touchscreen display, which provides a clear and responsive interface for easy navigation. The screen is designed to ensure visibility in various lighting conditions, allowing users to operate the system comfortably.

The VM9512 supports a wide range of media formats, including CDs, DVDs, and digital files, making it versatile for different audio and video needs. It features built-in Bluetooth technology, enabling hands-free calling and audio streaming from compatible devices, which enhances safety and convenience while driving. Additionally, the unit comes equipped with AM/FM radio, providing access to a variety of broadcast stations.

Another standout characteristic of the Jensen VM9512 is its compatibility with Apple CarPlay and Android Auto, allowing users to integrate their smartphones seamlessly. This functionality enables drivers to access navigation, music, and communication apps directly from the receiver's interface, promoting a safer driving experience by minimizing distractions.

The VM9512 also includes USB ports and an auxiliary input, allowing for direct connections to a variety of devices, including USB flash drives and external audio players. This feature expands the range of media options available, ensuring that users can enjoy their favorite content on the go.

In terms of audio performance, the Jensen VM9512 is equipped with a powerful built-in amplifier and customizable equalizer settings. This enables users to fine-tune their listening experience to match their preferences, whether they enjoy bass-heavy tracks or crystal-clear vocals. The device also supports multiple speaker configurations, allowing for extensive sound system customization.

Installation is user-friendly, with a standard double-DIN form factor that fits most vehicle dashboards. The VM9512's design is not only functional but also aesthetically appealing, enhancing the overall look of the vehicle's interior.

Overall, the Jensen VM9512 is a feature-rich multimedia receiver that combines modern technology with user-friendly design, making it an excellent choice for anyone looking to upgrade their in-car entertainment system. With its blend of audio features, connectivity options, and ease of use, this receiver stands out in a competitive market, catering to diverse consumer needs.
Top Page Image Contents