Jensen VM9512 operation manual Operating Instructions

VM9512

OPERATING INSTRUCTIONS

Power On / Off

Press the /SRC button (6) on the unit (or the /POWER button (4) on the remote control) to turn the unit on. The buttons on the front of the unit light up and the current mode status appears in the LCD (7). You can also turn on the unit by pressing the OPEN button (1) and opening the TFT screen.

Press and hold the button to power off the unit.The monitor is drawn back into the main compartment.

AUX1, AUX2 and CAMERA. The playing mode is displayed on the TFT and LCD screens.

Auxiliary Devices

External peripheral devices can be connected to this unit via

RCA output or MediaLink4. Select “AUX1” or “AUX2” mode to access and control connected auxiliary devices.

Source Menu

To access the SOURCE MENU, touch the TFT screen in the top left corner of the screen.

Table 4: Audio Adjustments

	Function		Adjustment Options
EQ		User		In user mode, you
				can manually adjust
				each of the seven fre-
				quency bands.
		Acoustic		Use the on-screen
				arrows to select a
		Urban
				predefined equaliza-
		Rave		tion curve.
		Latin

Audible Beep Confirmation

An audible beep tone confirms each function selection. The Beep tone can be disabled through the Setup menu.

Volume Adjustment

To increase or decrease the volume level, turn the rotary encoder (5) on the front panel or press the VOL+/ VOL- buttons (15, 16) on the remote control. When the volume level reaches “0” or “40”, a beep sounds, indicating that the adjustment limit has been reached. The volume ranges from “0” to “40”. The LCD or TFT screen displays the volume level for 3 seconds.

Programmable Turn-On Volume

This feature allows the user to select a turn-on volume setting regardless of the volume setting prior to turning the unit off. To program a specific turn-on volume level, turn the AUDIO control (2) to adjust the volume to the desired turn-on volume. Push and hold the AUDIO button while the yellow speaker icon and level indication is displayed on the screen. The unit will beep two times to confirm your turn-on volume setting.

Mute

Press the MUTE button on the front panel (8) or remote control (3) to mute the volume from the unit. Press the MUTE button again to restore the volume. “MUTE” is displayed on the LCD. Adjusting the volume or using any of the audio setup features cancels the mute function.

Line Mute

If the “MUTE” wire is connected, audio output mutes when a telephone call is received by the car phone.

Playing Source Selection

Press the SRC button on the front panel (6) or remote control

(8)to change between available playing sources in the following order: RADIO, SAT, DISC, NAV, BT, iPod, SD, USB,

DISC	SOURCE MENU
				F
DISC	SD	USB	NAV	R
				O
				N
				T
RADIO	SAT	iPod	BT	R
				E
			OFF	A
AUX 1	AUX 2	CAMERA		R

This menu allows you to select a source for the front or rear zone. Touch FRONT or REAR to choose the zone for which you would like to specify the source. (See “Multi-ZONE Operation” on page 16.)

Audio Control Menu

The Audio Control menu features a 7-band graphic equalizer, which allows you to easily adjust your audio system to meet the acoustical characteristics of your vehicle, which vary depending on the type of vehicle and its measurements. Proper setting of the Fader and Balance boosts the effects of the cabin equalizer.

Press the AUDIO button (5) on the front panel to display the audio menu. To adjust an audio feature:

1.Use the left/right joystick buttons to highlight the audio feature to be adjusted.

2.Press the joystick ENTER button on the control panel (13) or remote control (18) to select the highlighted option.

3.Use the joystick to adjust the selected feature to the desired setting.

	Dance
	Hip Hop
	Rock
FAD-BAL	Use this screen to adjust the output level for
	each speaker in your surround system from 0
	to -24dB. You can also adjust the master vol-
	ume from this screen.

NOTE: The EQ mode will automatically change to “USER” when individual EQ bands are adjusted.

Proper setting of the Fader and Balance complement the effects of the cabin equalizer.

The Audio menu will automatically exit after a few seconds of inactivity. To exit quickly, touch the top left corner of the screen or press and hold the AUDIO button (5).

Alternate Display Options

A menu located on the left side of the screen provides immediate access to the Equalizer, Rear Zone screen view and PIP (Picture in Picture) features.

•EQ: Touch to view Spectrum Analyzer > Equalizer.

•REAR: Touch to view the Rear Zone screen. Control options appear below the PIP image, depending on the source.

DISC

AM/FM RADIO

BAND AS

SATELLITE

CAT– CH– CH+ CAT+

14