
Installation 13
Speaker Positioning |
|
| |
|
| B |
|
| C |
|
|
A | G |
|
|
|
|
| |
F |
|
|
|
| A | A |
|
| A |
|
|
|
| A | E |
D | A |
|
|
NOTE
If the picture on nearby TV sets becomes magnetically distorted, keep the speaker away from your TV
Connections to Your
TV
Make one of the following connections, depending on the capabilities of your existing equipment.
NOTE
•Depending on your TV and other equipment you wish to connect, there are various ways you could connect the player. Use only one of the connections described in this manual.
•Please refer to the manuals of your TV, Stereo System or other devices as necessary to make the best connections.
CAUTION
•Make sure the unit is connected directly to the TV. Tune the TV to the correct video input channel.
•Do not connect your unit via your VCR. The image could be distorted by the copy
Component Video Connection
Connect the COMPONENT VIDEO (PROGRESSIVE SCAN) OUTPUT jacks on the unit
to the corresponding input jacks on the TV 3 using Y Pb Pr cables.
You can hear the sound through the system’s | Installation | |
speakers. | ||
Component Video Connection | ||
|
NOTE
If your TV accepts progressive format signals, you must use this connection and set [Progressive Scan] in [Display] setup to [On] (See page 17).