Lock Parental Control, Speaker Setup | LG Electronics HT355SD-A2

18Installation

5.1 Speaker Setup		Size – Since the speaker settings are fixed, you
Make the following settings for the built-in 5.1		cannot change the settings.
Make the following settings for the built-in 5.1		Volume – Press I i to adjust the output level
channel surrounds decoder.		Volume – Press I i to adjust the output level
1.	Press SETUP.	of the selected speaker.
1.	Press SETUP.	Distance – After you connected speakers
2.	Use U u to select AUDIO menu and then	Distance – After you connected speakers
2.	Use U u to select AUDIO menu and then	to your unit, set the Distance between the
	press i.	to your unit, set the Distance between the
	press i.	speakers and your listening point if the
		speakers and your listening point if the
3.	Use U u to select [5.1 Speaker setup] menu	distance of Center or Rear speakers is bigger
	and then press i.	than the distance of Front speakers. This allows
4.	Press ENTER	the sound from each speaker to reach the
4.	Press ENTER	listener at the same time. Press I i to adjust
	The [5.1 Speaker setup] appears.	listener at the same time. Press I i to adjust
	The [5.1 Speaker setup] appears.	the Distance of the selected speaker. This
		the Distance of the selected speaker. This
		distance is equivalent to a difference of the
3		distance between Center or Rear speaker and
Installation		Front speakers.
Installation		Test – Press I i to test the signals of each
		Test – Press I i to test the signals of each
		speaker. Adjust the volume to match the
		volume of test signals memorized in the
		system.
5.	Use I i to select the desired speaker.

6.Adjust options using U u I i buttons.

7.Press RETURN to confirm your selection. Return to the previous menu.

Speaker selection

Select a speaker that you want to adjust.

NOTE

Certain speaker settings are prohibited by the Dolby Digital licensing agreement.

LOCK (Parental Control)

Initial Setting of the Area Code:

When you use this unit for the first time, you have to set the Area Code.

1.Select the [LOCK] menu and then press i.

2.Press i.

To access the [LOCK] options, you must input the password you have created. Input a password and press ENTER. Enter it again and press ENTER to verify. If you make

a mistake before pressing ENTER, press

CLEAR.

3.Select the first character usingU u buttons.

4.Press ENTER and select the second character using U u buttons.

5.Press ENTER to confirm your Area code selection.

HT355SD-A2_DPANLLK_ENG_4769.indd18 18

2010-04-05 ¿ÀÈÄ 2:44:52

5.1 Speaker Setup

The [5.1 Speaker setup] appears.

Speaker selection

LOCK (Parental Control)

Initial Setting of the Area Code:

CLEAR.