LG Electronics ips231p owner manual Connecting with the PC, Varies according to model

Page 11

Connecting the Display

Connecting with the PC

1.

Before setting up the monitor, ensure that the power to the monitor, the computer

2.

system, and other attached devices is turned off.

Connect signal input cable 1 and power cord 2 in order, then tighten the screw

 

of the signal cable.

 

 

A Connect DVI-D(Digital signal) Cable

C Connect Audio Cable

BConnect D-sub(Analog signal) Cable

NOTE

This is a simplified representation of the rear view.

This rear view represents a general model; your display may differ from the view as shown.

When using a D-Sub signal input cable connector for Macintosh

Mac adapter : For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-sub VGA connector on the supplied cable to a 15 pin 2 row connector.

Varies according to model.

Wall-outlet type

Connect the signal input cable and tighten

it up by turning in the direction of the arrow as shown in the figure.

DVI-D (This feature is not available in all countries.)

3. Press the power button on the front panel to turn the power on. When monitor power is turned on, the 'Self Image Setting Function' is executed automatically.

(Only Analog Mode)

Power Button

NOTE

‘Self Image Setting Function’? This function provides the user with optimal display settings.When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals.

‘AUTO’ Function? When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen while using the device or after changing screen resolution, press the AUTO function button to improve resolution.

10

Page 10 Page 12
Image 11
Page 10 Page 12
Contents LCD Monitor Do not use a damaged or loose plug Safety PrecautionsUse only a properly grounded plug and receptacle Make sure to remove all cables before moving the product Do not put heavy objects on the product on sit upon itMake sure to turn off the product Keep the product away from water Do not place the product face downSafety Precautions Audio Cable AccessoriesThank for selecting LGE products Users Guide/CardsConnecting the stand base or Removing the stand base Connecting the DisplayPositioning your display After installation, adjust the angle as shown belowErgonomic Landscape & Portrait You can rotate the panel 90o clockwise Using the Pivot functionVaries according to model Connecting with the PCMenu Button OSD LOCKED/UNLOCKED Control Panel FunctionsFront Panel Controls Source Hot key Auto Image AdjustmentIPS231P/IPS231B 1920 x Screen Adjustment On Screen Display OSD Control AdjustmentPicture On Screen DisplayOSD Selection and AdjustmentColor Display Volume Others Mode UeOn Screen DisplayOSD Selection and AdjustmentMenu Name Icons Sub- menus Exit Exit Brightness Contrast SharpnessHUE PresetReset User SIX ColorHorizontal Vertical Clock PhaseWhite PowerIndicator Reset LanguageMenus SRGB Exit Exit Do you see OSD Locked when you push Menu button? TroubleshootingIs the power cord of the display connected? Is the power indicator flickering?Display image is incorrect Screen color is mono or abnormal Screen blinksWall SpecificationsPower Consumption Dimensions & Weight Environment al ConditionsIndicator Preset Modes ResolutionInstalling the Wall mount plate Wall Mount pad Wall mount plateSeparate purchaseKensington Security Slot Model
Top Page Image Contents