LG Electronics ips231p owner manual Connecting the Display

Page 7

Connecting the Display

Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices are turned off.

Connecting the stand base or Removing the stand base

1. Place the monitor with its front facing downward on a cushion or soft cloth.

2. Assemble the Stand Base into the Stand Body.

Be sure don't pull out the Stop Pin and make the Stand Base direction as shown.

Stop Pin

Stand Body

Stand Base

WARNING

The tape and locking pin may only be removed from those monitors equipped with a standing base when the base is pulled up. Otherwise, you may be injured by the protruding sections of the stand.

Product Handling with Care : When you lift up or move the product, Do Not hold or touch the front part of LCD panel. It will damage the panel. (Please hold the Stand Body or plastic cover of the product.)

6

Image 7

Contents LCD Monitor Use only a properly grounded plug and receptacle Safety PrecautionsDo not use a damaged or loose plug Make sure to turn off the product Do not put heavy objects on the product on sit upon itMake sure to remove all cables before moving the product Keep the product away from water Do not place the product face downSafety Precautions Audio Cable AccessoriesThank for selecting LGE products Users Guide/CardsConnecting the stand base or Removing the stand base Connecting the DisplayPositioning your display After installation, adjust the angle as shown belowErgonomic Landscape & Portrait You can rotate the panel 90o clockwise Using the Pivot functionVaries according to model Connecting with the PCFront Panel Controls Control Panel FunctionsMenu Button OSD LOCKED/UNLOCKED IPS231P/IPS231B 1920 x Auto Image AdjustmentSource Hot key Screen Adjustment On Screen Display OSD Control AdjustmentColor Display Volume Others On Screen DisplayOSD Selection and AdjustmentPicture Mode UeOn Screen DisplayOSD Selection and AdjustmentMenu Name Icons Sub- menus Exit Exit Brightness Contrast SharpnessHUE PresetReset User SIX ColorHorizontal Vertical Clock PhaseWhite PowerIndicator Reset LanguageMenus SRGB Exit Exit Do you see OSD Locked when you push Menu button? TroubleshootingIs the power cord of the display connected? Is the power indicator flickering?Display image is incorrect Screen color is mono or abnormal Screen blinksWall SpecificationsPower Consumption Dimensions & Weight Environment al ConditionsIndicator Preset Modes ResolutionInstalling the Wall mount plate Kensington Security Slot Wall mount plateSeparate purchaseWall Mount pad Model