LG Electronics ips231p owner manual Troubleshooting, Is the power cord of the display connected?

Page 24

Troubleshooting

Check the following before calling for service.

No image appears

●Is the power cord of the display connected?

●Is the power indicator light on?

●Is the power indicator flickering?

●Do you see an "OUT OF RANGE" message on the screen?

●Do you see a "CHECK SIGNAL CABLE" message on the screen?

•Check and see if the power cord is connected properly to the power outlet.

•Press the Power button.

•If the display is in power saving mode, try moving the mouse or pressing any key on the keyboard to bring up the screen.

•Try to turn on the PC.

•This message appears when the signal from the PC (video card) is out of horizontal or vertical frequency range of the display. See the 'Specifications' section of this manual and configure your display again.

•This message appears when the signal cable between your PC and your display is not connected. Check the signal cable and try again.

Do you see a "OSD LOCKED" message on the screen?

●Do you see “OSD LOCKED” when you push MENU button?

•You can secure the current control settings, so that they cannot be inadvertently changed. You can unlock the OSD controls at any time by pushing the MENU button for several seconds: the message

“OSD UNLOCKED” will appear.

23

Image 24

Contents LCD Monitor Safety Precautions Use only a properly grounded plug and receptacleDo not use a damaged or loose plug Do not put heavy objects on the product on sit upon it Make sure to turn off the productMake sure to remove all cables before moving the product Do not place the product face down Keep the product away from waterSafety Precautions Accessories Thank for selecting LGE productsUsers Guide/Cards Audio CableConnecting the Display Connecting the stand base or Removing the stand baseAfter installation, adjust the angle as shown below Positioning your displayErgonomic Using the Pivot function Landscape & Portrait You can rotate the panel 90o clockwiseConnecting with the PC Varies according to modelControl Panel Functions Front Panel ControlsMenu Button OSD LOCKED/UNLOCKED Auto Image Adjustment IPS231P/IPS231B 1920 xSource Hot key On Screen Display OSD Control Adjustment Screen AdjustmentOn Screen DisplayOSD Selection and Adjustment Color Display Volume OthersPicture UeOn Screen DisplayOSD Selection and Adjustment ModeMenu Name Icons Sub- menus Brightness Contrast Sharpness Exit ExitPreset ResetUser SIX Color HUEPhase Horizontal Vertical ClockPower IndicatorReset Language WhiteMenus SRGB Exit Exit Troubleshooting Is the power cord of the display connected?Is the power indicator flickering? Do you see OSD Locked when you push Menu button?Display image is incorrect Screen blinks Screen color is mono or abnormalSpecifications Power Consumption Dimensions & WeightEnvironment al Conditions WallPreset Modes Resolution IndicatorInstalling the Wall mount plate Wall mount plateSeparate purchase Kensington Security SlotWall Mount pad Model