JBL Applications CS200.1, Applications CS50.4, Set crossovers according to application

APPLICATIONS – CS200.1

The CS subwoofer amplifiers are single-channel amplifiers. There are two sets of terminals to make it easy to connect multiple woofers. Either set of (+/–) terminals may be used when connecting woofers.

To the right are two application diagrams to help plan your subwoofer system installation. Figures 2 and 3 show how to configure the CS200.1 subwoofer amplifiers.

NOTE: For simplicity, Figures 2 and 3 do not show power, remote and input connections.

NOTE: Minimum speaker load is 2 ohms.

Figure 2. CS subwoofer amplifier with two woofer connections.

Figure 3. CS subwoofer amplifier with one woofer connection.

APPLICATIONS – CS50.4

The CS50.4 can be set up for stereo	NOTE: For simplicity, Figures 4 through 6 do
4-channel, 3-channel or bridged	not show power, remote and input
2-channel operation, as shown in	connections.
Figures 4 through 6.

NOTE: Minimum speaker impedance for stereo operation is 2 ohms.

Minimum speaker impedance for bridged operation is 4 ohms.

Figure 4. CS50.4 amplifier in 4-channel (stereo) operation to drive front and rear full-range speakers.

Figure 5. CS50.4 is set up for 3-channel operation to drive a set of full-range speakers and a subwoofer.

Figure 6. CS50.4 used in bridged 2-channel mode to drive a set of components or subwoofers.

Set crossovers according to application.

3