Home Automation 1503 Home Automation, Inc, The display will read “GO TO BED MASTER ASLEEP”

Home Automation, Inc.

The display will read “GO TO BED: MASTER ASLEEP”

Press the ENTER key.

The console will beep once and the program will be entered into memory. Button 3 is now programmed for the GO TO BED example.

TO SEE YOUR BUTTON PROGRAMS

To see the programs for BUTTON 3, press CANCEL to get back to the time, date and status display. Now press SHOW, PROG, *, 3, ENTER.

The first program for BUTTON 3 will appear on the display.

Press SHOW to see the second and third programs for BUTTON 3.

If there are no more programs in memory for BUTTON 1, then the dis- play will show “NO MORE PROGRAMS” and return to the last program. The console will beep three times. You can press SET-UP to go back through the programs for BUTTON 3. See SHOW PROGRAMS for more informa- tion.

Press CANCEL twice to exit the SHOW PROGRAMS menu.

You can enter more programs for BUTTON 3 or any other button when- ever you wish using PROG, *.

To brighten or dim lights, or to program other security modes on buttons, or to bypass or restore zones, simply substitute those commands for the ones shown in the example.

TO RUN BUTTON PROGRAMS

Any time you want to activate the programs entered for a button, press the button number, then ENTER from the time, date and status display.

To run the BUTTON 3 programs in the example above, first look at the display to see that it is displaying time, date and status. (If not, press cancel until it does.)

Press the 3 key on the keypad, then SHOW.

The display will read “RUN GO TO BED - ENTER CANCEL”

Press ENTER.

The programs will be run. The console will beep once and display the number of programs found for BUTTON NUMBER 3, then return to the time, date and status display.

You may omit pressing the SHOW button if you wish.

If you do not wish to run the button programs, press CANCEL in- stead of ENTER.

If no programs are found for the button, the console will beep three times and read “ 0 PROGRAMS RUN”, then return to the time, date and status display.

TIMED PROGRAMMING OF BUTTONS

NOTE: In UL Listed Installa- tions, Timed Programming of Button functions which control the secu- rity system (i.e. arming and dis- arming) shall not be used.

40