Home Automation 1503 owner manual Home Automation, Inc

Models: 1503

1 80
Download 80 pages 51.31 Kb
Page 18
Image 18
-The Outdoor Siren is activated, which makes a loud, continuous sound.

Home Automation, Inc.

-The system now waits the OUTSIDE SIREN DELAY. (0 - 60 seconds)

-The Outdoor Siren is activated, which makes a loud, continuous sound.

-The system now waits the DIAL OUT DELAY. (0 - 60 seconds)

-The in house phones are seized (or disconnected) and the Model 1503 begins to dial out.

If you are having your system monitored by a central station, the central station will be sent a code representing the type of alarm (burglary) and zone involved. In most cases, the central station will call back, requesting your password or passcode.

If you are not using central station monitoring but are using the voice dial out capability, the system looks at the BURGLAR DIAL ORDER to determine which number to call first, and calls that number.

If you are using both central station monitoring and voice dial out, then the voice dial out is delayed by five minutes to give the central station time to call you back.

For the voice dial out, the mes- sage delivered to the called party when he answers and says something is: “BURGLAR ALARM: (your address is spoken here*) ...EMERGENCY

...EMERGENCY... THE BURGLAR ALARM HAS BEEN ACTIVATED AT THE FOLLOWING ADDRESS: (your address is spoken here*) PHONE NUMBER (your phone

number that is stored in SET-UP location MY PHONE NUMBER is spoken here) PLEASE RESPOND IMMEDIATELY.”

The message is repeated two times. At any point during the message, the called party can enter a code as described in EMERGENCY DIAL OUT to log in and stop the Model 1503 from dialing any further numbers.

If the called party is busy, does not answer, or answers but does not enter a code, then the Model 1503 goes to the BURGLAR DIAL ORDER to determine the next number to dial, and the next call is made. When the last call is made in the BURGLAR DIAL ORDER, the house phones are reconnected and the system stops dialing.

-The system continues to sound all alarms and flash the flash- ing light for 4 minutes after the alarm is activated.

-After 4 minutes, the outside siren and interior sounder are turned off, and the alarm system resets itself. The console beeper stays on, the lights con- tinue to flash. If any other zone is tripped after a reset, the outdoor siren will again be activated, and the dialer will again dial out.

At any time, the alarm system can be turned off at the console.

FIRE ALARM ACTIVATED

16

Page 18
Image 18
Home Automation 1503 Home Automation, Inc, The Outdoor Siren is activated, which makes a loud, continuous sound

FAQ

What is the purpose of the outside siren delay?

The outside siren delay allows a 0-60 second window before the outdoor siren is activated, giving the user time to deactivate the alarm if triggered accidentally.

How does the system determine the number to call in case of a burglary alarm?

The system looks at the burglar dial order to determine which number to call first, and calls that number. If using both central station monitoring and voice dial out, the voice dial out is delayed by five minutes to give the central station time to call back.

How is the alarm system reset after being activated?

After 4 minutes, the outside siren and interior sounder are turned off and the alarm system resets itself. The console beeper stays on, and the lights continue to flash until deactivated at the console.