Home Automation 1503 owner manual Home Automation, Inc, then enter your master code number

Home Automation, Inc.

then enter your master code number.

The console will beep once, and the time, date and status display will return. The bottom line will now read “UPSTAIRS WINDOW BYPASSED” to remind you that the zone is bypassed.

RESTORING ZONES

Restoring a zone puts it back on active duty in the system. When restored, the BYPASSED indication will no longer be displayed on the status line and the zone will be checked for alarm and trouble con- ditions.

To restore a zone that has been bypassed, press any of the SECURITY keys, then the # key, the number of the zone to restore then ENTER, (or # to restore ALL zones), then your code number.

For example, to turn the security system off and restore zone 2, press SECURITY-OFF, #, 2, ENTER, then your code number.

The console will beep and the display will return to the time, date and status display. You can also scroll through the zones by pressing the SHOW key instead of the zone number.

To simply restore all of the zones, press # when the display reads “RESTORE ZONE:”

AUTO-BYPASS

In order to prevent the alarm from sounding unexpectedly if a window or door is open when the

system is armed, the Model 1503 will automatically bypass a zone if the zone is in the alarm state when the system is armed.

When this happens, the display will indicate that the zone was bypassed.

Note that there is an exit delay before the system is armed in any mode, so that the bypass will only take place if the zone is in alarm when the exit delay is over and the system actually arms itself.

When a zone is AUTO-BYPASSED, it will be automatically restored the next time you arm or disarm the system. The auto-bypass is recorded in the event log as “ZONE NAME BYPASSED”

To prevent any zone from being bypassed unintentionally, you should always look for SYSTEM OK on the display before arming and leav- ing the premises.

The AUTO-BYPASS feature can be disabled if you do not want the system to automatically bypass open zones. If the auto-bypass feature is disabled, the alarm will sound if an open zone is armed.

NOTE: The AUTO-BYPASS feature is disabled on UL Listed Installa- tions.

14