Home Automation 1503 owner manual ASLEEP, 3 AWAY, STAR * CAN- CEL”

LO TEMPERATURE IS 65 DEGREES. HI TEMPERATURE IS 85 DEGREES. COM- MANDS ARE: 0: OFF, 1: ON, 2: OFF FOR TIME, 3: ON FOR TIME, 4 LO, 5 HI, STAR (*) CANCEL.”

This message means that the en- ergy saver is on or off, that the air temperature at the PESM is 76 degrees Fahrenheit, that the set- ting for the LO temperature is 65 degrees F, and that the setting for the HI temperature is 85 degrees F. You may turn the energy saver on or off, on for time, off for time, or change the low or high settings.

If a unit number has been set up as a PESM, then (4) LO refers to the low temperature setting and (5) HI refers to the high temperature setting.

To change the LO setting, press 4.

The Model 1503 will say “ENTER LO TEMPERATURE, THEN POUND KEY.”

Enter the new low temperature, then press the pound key.

The Model 1503 will then confirm the new low setting.

Press star (*) to go back to the main menu.

Remember that the LO and HI tem- perature settings are the tempera- tures that will be maintained by your Model 1503 when the Program- mable Energy Saver Module is on. When the PESM is off, your thermo- stat will control the temperature.

If the unit number is not set up as a PESM, then 4 (LO) and 5 (HI) do not do anything.

Model 1503 Owner's Manual

2 - SECURITY

Press 2 from the main menu to get to the Security menu.

The Model 1503 will say: “SECU- RITY COMMANDS ARE: 0: OFF, 1: HOME,

2:ASLEEP, 3: AWAY, STAR (*): CAN- CEL”.

Press 0 for SECURITY OFF, 1 for HOME, 2 for ASLEEP or 3 for AWAY.

If you press 0, the Model 1503 will say: “OFF. ENTER CODE NUMBER, STAR: BYPASS, POUND KEY: RESTORE”

At this point, you can enter your code number to put the secu- rity system in the whichever mode you selected, OR you can bypass and restore zones.

To cancel, press * twice.

To put the security system in the mode you selected, enter your code number on the telephone key- pad. When correctly entered, the Model 1503 will say “SECURITY MODE IS (whatever you set it to.)

To bypass a zone, press the * key instead of entering your code number. The

Model 1503 will say “ENTER ZONE NUMBER TO BYPASS, THEN POUND KEY. STAR: CANCEL”.

Press the zone number that you want to bypass, then press the # key.

The Model 1503 will repeat the number of the zone you are bypass- ing, then say “CODE NUMBER:”.

55