Home Automation 1503 owner manual Show, Home Automation, Inc

Home Automation, Inc.

6. SHOW

The SHOW function allows you to show the following items on the display:

-Programs - all timed and button programs

-Events - the 50 most recent alarm system events

-Test - a test facility for the zones

-Aux - the status of tempera- tures, auxiliary inputs and out- puts

SHOW PROGRAMS

You can show all of your pro- grams or selected programs using the SHOW PROGRAM function. When you enter the SHOW PROGRAM function, the console display will allow you to see the entire list of programs, or to see specific security, unit number or button programs on the display.

When you have selected only cer- tain programs for display, the other programs are “masked out” (think of masking tape over the programs you don’t want to see) so that only the ones that you are interested in are displayed.

Programs can also be changed and deleted, if you wish, using the SHOW function.

SHOW ALL PROGRAMS

The console display should be at the time, date and status display.

To show all programs in memory, press

SHOW (from the time date and status display.)

The display top line will read “SHOW:” and the bottom line will read “PROG *EVENTS #TEST 1AUX”, indicating that your next choices are to press the PROG key, or * for Events, or # for Test, or 1 for Auxiliaries.

Press the PROG key.

The display reads “SHOW PROGRAM: 1DELETE UNIT# 2SEC *BTTN”, indicat- ing that you have selected to SHOW PROGRAMS, and that your next choices are to press 1 to delete a program, the UNIT-NUMBER key to show only unit number programs, the 2 key to see Security programs, or the * key to see the BUTTON pro- grams.

Press the SHOW key.

By pressing the SHOW key before pressing UNIT-NUMBER, 2 for Secu- rity or * for Buttons, you have told the Model 1503 that you want to see ALL programs in memory.

If there are any programs in memory, the first one will appear on the display.

Press the SHOW key to see the next program in memory.

When you reach the end of the programs, the console will beep three times and the display will read “NO MORE PROGRAMS”, then the display will show the last program in the list.

Press the SET-UP key to go back to the

48