What happens when the police emergency button is pressed?

When the police emergency button is pressed, the console display will indicate 'EMERGENCY ALARM!-POLICE EMG BTN TRIPPED'. The interior sounder and outdoor siren will be activated immediately without any delay. The central station will be sent a code representing the type of alarm, and the voice message delivered to the called party will prompt an immediate response.

How does the system handle fire emergency button activation?

When the fire emergency button is pressed, the alarm operates similarly to the police emergency button, with the interior sounder and exterior siren pulsing on and off to distinguish the fire alarm from the burglar alarm.

BURGLAR ALARM ACTIVATED except, Mediately.”

Q: How does the system respond to a fire alarm activation?

When the fire alarm is activated, the console display will read 'FIRE ALARM! ZONE NAME TRIPPED'. The interior and exterior sounders will pulse on and off to distinguish the fire alarm from the burglar alarm. The central station will receive a fire alarm signal, and the voice dial out order will be determined by the fire dial order instead of the burglar dial order.

When the FIRE alarm is activated by the smoke/fire detector(s), the alarm responds exactly as described under BURGLAR ALARM ACTIVATED, except:

-The console display reads “FIRE

ALARM! ZONE NAME TRIPPED”

-The interior sounder will pulse on and off to distinguish the fire alarm from the burglar alarm.

-The outside siren will pulse on and off to distinguish the fire alarm from the burglar alarm

-The Central Station (if used) will receive a FIRE ALARM sig- nal.

-The voice dial out order will be determined by the FIRE DIAL OR- DER instead of the BURGLAR DIAL ORDER. The message delivered to the called party is “FIRE ALARM (your address here*) ...EMER- GENCY... EMERGENCY... THE FIRE ALARM HAS BEEN ACTIVATED AT THE FOLLOWING ADDRESS: (Your address here*) PHONE NUMBER (your phone number here) PLEASE RESPOND IM-

MEDIATELY.”

The fire alarm takes priority over the burglar alarm.

POLICE EMERGENCY BUTTON PRESSED

When the POLICE EMERGENCY BUTTON is pressed, the alarm operates exactly the same as described for

BURGLAR ALARM ACTIVATED except:

Model 1503 Owner's Manual

-The console display indicates

“EMERGENCY ALARM! - POLICE EMG BTN TRIPPED”

-The interior sounder and the outdoor siren are activated im- mediately. Note that there is no outside siren delay for emer- gency buttons.

-The central station (if used) will be sent a code representing the type of alarm (police emer- gency button.)

The voice message delivered to the called party when he answers and says anything is: “POLICE EMER- GENCY BUTTON (your address here*)

...EMERGENCY ...EMERGENCY... THE POLICE EMERGENCY BUTTON HAS BEEN ACTIVATED AT THE FOLLOWING ADDRESS: (Your address is spoken here*) PHONE NUMBER (your phone number that is stored in SET-UP location MY PHONE NUMBER is spoken here)

PLEASE RESPOND IMMEDIATELY.”

The message is repeated two times. At any point during the message, the called party can enter a code as described in EMERGENCY DIAL OUT to log in.

FIRE EMERGENCY BUTTON PRESSED

When the FIRE EMERGENCY BUTTON is pressed, the alarm operates exactly as described for POLICE EMERGENCY BUTTON except:

- The interior sounder and exte- rior siren pulse on and off to distinguish the fire alarm from the burglar alarm.

Home Automation 1503 BURGLAR ALARM ACTIVATED except, The console display reads “FIRE, Mediately.”

Models: 1503