Home Automation 1503 Up Codes, Home Automation, Inc, Master Code, Auxiliary Codes, Duress Code

Home Automation, Inc.

the LARGER of the two cables (marked PHONE LINE on the pro- cessor board) plugged into the Model 1503 Processor board to be sure that it is firmly connected at both ends.

To silence the trouble beeps on the console, press the CANCEL key. If more than one type of trouble has occurred, the display will show each one for two seconds. Pressing the CANCEL key will acknowledge all trouble indications.

If the trouble condition occurs again, the console beeper will beep again. See SET-UP MISC., BEEP ON TROUBLE if you wish to disable the beeper.

-SYSTEM FAILURE will be indicated in the event that the console's alarm functions are no longer operational. This may indicate a wiring problem to the console or a more serious problem. Follow the procedure above for reset- ting the PTC fuses, or call your installer for service.

CODES

All Model 1503 codes are 4 dig- its in length. A code can be any number from 0001 to 9999. Memorize your codes! Don’t give them to anyone who doesn’t need to know them.

MASTER CODE

The Master code allows you to do everything. The owner of the system should have and use the master code.

AUXILIARY CODES

The auxiliary codes can arm/ disarm security system, but cannot change codes or be used to arm/ disarm the system from outside the home over the telephone. The auxil- iary code cannot be used to program the security system mode (OFF, HOME, ASLEEP, AWAY.) Finally, the auxiliary codes cannot be used to bypass or restore zones.

There are four auxiliary codes. The number of the code (1 through

4)used is recorded in the event log.

The first auxiliary code can be switched on and off by time and day of week if desired, making it ideal for use as a maid's code. See SET-

UP CODES.

It is recommended that temporary users, such as baby-sitters, be assigned an auxiliary code.

DURESS CODE

If you are forced to disarm the system against your will by an intruder, disarm it as you normally would, but use the DURESS CODE instead of the master or auxiliary code. The system will disarm nor- mally. No sirens will sound, no lights will flash, but the Model 1503 will perform a silent dial out and say that this is a silent alarm.

To stop a silent dial out, turn your security system off the usual way, pressing SECURITY-OFF then your master code.

22 ACCESS CODE