Home Automation 1503 owner manual Home Automation, There are 4 auxiliary codes

Home Automation,

IF YOU FORGET your master code or if you have purchased a home with a system whose code is un- known, contact your dealer to have a new code installed.

AUXILIARY CODES 1 - 4

There are 4 auxiliary codes.

To take an auxiliary code out of the system, enter 0000 as the code.

Your first AUXILIARY code is intended for maids, service people or anyone who needs occasional access to your premises. The first AUXILIARY code can be switched on or off on a time and day schedule. For example, you may wish the AUX- ILIARY code to be valid only on Mondays, Wednesdays and Fridays between the hours of 8 AM and 5 PM to allow your house cleaner to turn off the security system.

To change the AUXILIARY code, press the SHOW key to advance the display to the next item in the CODES category.

(You can press the SET-UP key to go back to the previous item, MAS- TER CODE.)

You may now enter a new four digit AUX CODE #1, as described for the MASTER code.

The AUXILIARY code can be used to arm and disarm the system and perform all other functions EXCEPT bypass zones, change codes and program the security system on or off. If HIGH SECURITY mode is on, then the auxiliary code cannot be used to program, show or set-up anything.

The AUXILIARY codes cannot be used over a remote telephone. It can be used over an in-house phone (the Model 1503 System knows the difference.)

AUX CODE #1 ON TIME

Press the SHOW key to advance the display to AUX CODE #1 ON:

The display will show a time and days, or the word NEVER on the bottom line. You may enter a time and one or more days of the week to turn the auxiliary code on, and a time and one or more days of the week to turn the auxiliary code off. Selecting 0 for days will change the ON (or OFF) time to NEVER. You must select at least one day of the week to take away the NEVER indication.

To change the AUX CODE ON time to 8:00 AM Monday, Wednesday and Friday, press the DATE/DAY key. Press 1 (for MONDAY) 3 (for WEDNESDAY) and 5 (for FRIDAY.)

If you make a mistake and wish to clear the days back to NEVER, press 0 and start over.

As you enter the days, the dis- play will show which day(s) you have selected. When you are satis- fied with the days, press ENTER. The console will beep, indicating that the new days have been ac- cepted.

To change the time, press the TIME key and enter the new time.

When you press the AM or PM key, the new time will be accepted with a beep, and the new time displayed.

66