Home Automation 1503 owner manual Home Automation, a.View or Change SET UP items. SET-UPkey

Home Automation,

Press SHOW to advance the display to

HIGH SECURITY MODE.

In HIGH SECURITY MODE, the MAS- TER CODE is always required to do the following functions:

a.View or Change SET UP items. (SET-UP key)

b.Create PROGRAMS. (PROG key)

c.View or delete PROGRAMS or the EVENT LOG (SHOW key)

d.Access the system from a lo- cal phone.

With HIGH SECURITY MODE off, no code is required if the security system is in the OFF mode. If the security system is on (i.e. in the HOME, ASLEEP or AWAY mode) then you will be prompted to enter the mas- ter code when you press the SET-UP, PROG or SHOW keys.

If your system is set up with HIGH SECURITY on, the display will request the MASTER CODE whenever you select one of these functions, even if the security system is OFF. Simply enter your master code.

Your system was shipped from the factory with HIGH SECURITY off, which allows you to change set up items, create and delete programs and view the event log without having to enter your master code. In most residential applications, this is appropriate. If you have a commercial installation, or would like added protection from unautho- rized access to the system, you may wish to turn the HIGH SECURITY MODE on.

To turn HIGH SECURITY MODE ON, press a 1 then ENTER. To turn HIGH SECURITY

MODE OFF, press a 0 then press ENTER.

ENABLE AUTO-BYPASS

The AUTO-BYPASS feature allows the system to automatically bypass an open zone when the system is armed, rather than setting off the alarm. In some applications, it may be preferable to allow arming ONLY if all zones are secure.

To turn AUTO-BYPASS ON, press a 1 then ENTER. To turn AUTO-BYPASS OFF, press a 0 then press ENTER.

With AUTO-BYPASS OFF, all zones to be armed must be secure when the system is armed. Otherwise, the console will beep three times and display “ZONE NOT SECURE.” If the system is armed and a zone is open when the EXIT DELAY expires, the alarm will sound.

You have now seen all items in the CODES category. Pressing the SHOW key again will cause the dis- play to start over with the MASTER CODE. Press CANCEL to return to the SET-UP menu.

MISCELLANEOUS CATEGORY

To view or change items in the MISCELLANEOUS category, press SET-UP, 2.

To see the next item in this category, press SHOW. To see the previous item, press SET-UP. To exit the set-up facility, press CANCEL.

The first item in the MISCELLA- NEOUS category is the ENTRY DELAY.

68