Home Automation 1503 Auxiliary Code Off Time, Auxiliary Code Auxiliary Code Auxiliary Code

AUXILIARY CODE OFF TIME

Press the SHOW key to advance the display to AUX CODE #1 OFF:

You may now enter the time and day of week that the Auxiliary code is turned off, or disabled.

To change the AUX CODE OFF time to 5:00 PM, Monday, Wednesday and Friday, follow the steps in the example for AUX CODE ON, substituting the time of 5:00 PM.

If you have followed the ex- amples for AUX CODE ON and AUX CODE OFF, your auxiliary code will be valid between the hours of 8:00 AM and 5:00 PM on Mondays, Wednesdays and Fridays.

If you set both the AUX CODE ON and AUX CODE OFF times to NEVER, the AUX CODE will never be valid.

To turn your auxiliary code off, press SET-UP 1(Codes), then press the SHOW key to advance to AUX TIME ON:. Press DATE/DAY, 0, ENTER. Then press CANCEL to exit the SET-UP facility. Or, enter 0000 as the code.

AUXILIARY CODE 2

AUXILIARY CODE 3

AUXILIARY CODE 4

These codes can be given to fam- ily members or others. They have the same capability as AUX CODE #1, but do not have an on time and off time.

To enter a new auxiliary code, enter the four digits of the code then press

Model 1503 Owner's

ENTER. To remove a code, enter 0000 in its place.

DURESS CODE

Press the SHOW key to advance the display to NEW DURESS CODE:

If you are forced to disarm the system against your will by an intruder, use the DURESS code in- stead of the master or auxiliary code.

The alarm system will disarm normally, except that a silent dial out will be performed. The duress code is always active, and can only be used on the console and on an in-house telephone to change the security system mode.

To cancel a duress dial out, you must arm or disarm the security system using the master or valid auxiliary code.

The duress code is NOT set at the factory. Enter a duress code immediately. Record and remember the new Duress code.

ACCESS CODE

The ACCESS code allows remote telephone access, but cannot be used to arm or disarm the security system. The access code cannot be used on the console. The access code can be used to stop the system from making any further voice dial calls.

HIGH SECURITY MODE

67