Home Automation owner manual Mmdd Day”, Model 1503 Owners

The display will read “FRONT PORCH OFF - 12:00 AM 11/08 *IF”.

Press TIME, AM.

The display will read “FRONT PORCH OFF - SUNRISE 11/08 *IF”.

Now press the DATE-DAY key once.

The display will read “DATE: 11/

08 - MMDD DAY”

Enter 1, 1, 0, 9, then press ENTER. (for 11/09, tomorrow.)

The display will read “FRONT PORCH OFF - SUNRISE 11/09 *IF”.

Since this is what we want, press

ENTER.

The console will beep and the display will go back to the program menu. The front porch light will be turned off on date 11/09 at sun- rise. Once this program has run, it will be deleted from memory auto- matically since it is a one time program.

EXAMPLE 3: Turn the Security system to AWAY mode at 10:30 PM on 11/10.

From the PROGRAM menu (press the PROG key if you’re at the time, date and status display), press AWAY.

The display reads “ARM SYSTEM: AWAY CODE *BYPASS #RESTORE.”

Enter your MASTER CODE. ONLY the master code can program the security system modes, the auxiliary codes cannot.

(You may also program the system to bypass and restore zones, if desired. To do so, press * or #,

Model 1503 Owner's

then the zone number to bypass or restore, then enter your master code.)

The display will now read “PROGRM AWAY 12:00 11/08 *IF.”

Press TIME, 1, 0, 3, 0, PM.

Press DATE-DAY 1, 1, 1, 0, ENTER.

The display will now read “PROGRM AWAY 10:30 PM 11/10 *IF”.

At this point, we can save the program by pressing ENTER, or press CANCEL to skip saving the program and go back to the PROGRAM menu. Press CANCEL. The console will beep once and go back to the PROGRAM menu.

REPEATING PROGRAMS

Repeating programs are pro- grammed by time and day of the week. They do not delete them- selves. They will run every day that they are programmed to run until you delete the program using SHOW PROG DELETE. Three examples are given.

EXAMPLE 4. Program Unit number 2 (your FRONT PORCH light) to come on at sunset every day of the week.

From the time, date and status display, press PROG, UNIT-NUMBER, 2 (or the SHOW key twice), ON.

Press TIME, PM.

Press DATE-DAY TWICE.

The display will read “DAY(S): ONCE 1-9 0=ONCE.” You can now enter the days of the week that you

35