Home Automation owner manual The display will request your MASTER CODE, Model 1503 Owners

through 7 for Sunday.

The console will beep as it ac- cepts the new day of week.

If the console beeps 3 times and erases the time or date you have entered, the new time or date was invalid (example, 13:00 PM). Try again.

CATEGORIES

The next items that can be set up are grouped into three catego- ries: DIAL, CODES and MISCELLA- NEOUS. Once you select a category, there are numerous items in the category that can be changed. To advance to the next item in the category, press the SHOW key. To see the previous item in the cat- egory, press the SET UP key. The display will wrap around from the last to the first and vice versa.

The items are listed below in the order that they appear in each category when pressing the SHOW key.

CODES CATEGORY

To set up your CODES, press SET-UP, 1(Codes)

The display will request your

MASTER CODE.

Enter your master code.

Model 1503 Owner's

MASTER CODE

The display will read "NEW MAS- TER CODE: 0000-9999." You may now enter a new four digit master code, if you wish.

Enter the four new digits, which will be echoed on the display. If you make a mistake, press CANCEL.

The existing code will NOT be changed until you have entered 4 new digits and pressed the ENTER key. When the new code is accepted, you will hear the console beep once. The new code is now in perma- nent storage and will never be displayed by the system again.

REMEMBER YOUR NEW CODE!

Although you may change your codes, the system will never allow you nor anyone else to see the existing code. You may only change a code to a new code.

Your master code allows you to do any and all functions from the console and from the telephone. You should not give your master code to anyone who doesn’t need to know it. If someone finds out what your master code is, you should change it.

Your master code was programmed to 1111 at the factory. CHANGE IT TO ANOTHER CODE IMMEDIATELY. Record your new code and keep it in a safe place.

65