Home Automation 1503 owner manual Refer to UNDERWRITERS LABORA, Set-Up, Home Automation

Home Automation,

9. SET-UP

Refer to UNDERWRITER'S LABORA-

TORIES REQUIREMENTS for set up requirements in UL Listed Installa- tions.

This section describes the items normally associated with setting up the system when it is installed.

However, over the life of the sys- tem you may wish to change them.

SET-UP items are stored perma- nently in the system, even if the battery and AC power are discon- nected. The “default” settings in are the ones that have been set at the factory. Either you or your dealer can review or change the set up items easily, as shown below.

To enter the SET-UP facility, press the SET-UP key.

The bottom line of the display will indicate your choices, which are TIMe, DATe, DIAL, 1CODES and 2MIScellaneous. The 1 next to the word CODES indicates that you press the 1 key to set up CODES, 2 to set up miscellaneous.

SET TIME

To set the clock in the system, press SET-UP, TIME.

The display will request that you enter the current hours and minutes in the form HH (for hours) and MM (for minutes), then press the AM or PM key. You can skip the first digit of the hour if it is zero. The system will then ask if

it is daylight savings time or not. (This is used in the sunrise/sunset calculation.)

Enter a 0 for no, 1 for yes.

In North America, daylight sav- ings time is usually in effect for summer, and not in effect for win- ter.

For example:

To set the clock to 5:30 PM (no daylight savings), enter 5, 3, 0, PM, 0.

To set the clock to 12:00 noon with daylight savings time in effect, enter 1, 2, 0, 0, PM, 1.

The console will beep once as it accepts the new time. If the dis- play was showing >SET UP TIME AND DATE<, then it will also require you to enter the date and day of week, as shown below.

SET DATE

To set the DATE and DAY OF WEEK in the system, press SET-UP, DATE/DAY. Enter the date in the form MM (for months) DD (for days) and YY (for year). Leading zeros cannot be skipped.

For example,

To set the date to December 3, 1993, press 1, 2, 0, 3, 9, 3. To set the date to January 1, 1994, press 0, 1, 0, 1, 9, 4.

The console will beep once as the date is accepted. The system will then request the Day of Week.

Press the appropriate key, 1 for Monday

64