Home Automation 1503 Programming, Home Automation, Inc, You may program the following items

Home Automation, Inc.

determines which unit numbers to skip by looking at the number of expansion enclosures. If there are none, then units 20 - 80 are not used. In scrolling up and down, the display will jump from unit 19 to unit 81 when you press the up arrow key, and from 81 to 19 when you press the down arrow key. If expan- sion enclosures are installed, the display will show the unit numbers used by the expansion enclosures.

If text descriptions of each zone have been entered, there is no discernible gap in unit numbers. You can still enter any unit number to access it directly, and then scroll up and down among the unused units.

For example, pressing UNIT-NUM- BER, SHOW, SHOW... will display the names of units starting with Unit

1.When you get to unit 19, the display will jump to Unit 81 if there are no expansion enclosures.

5. PROGRAMMING

Your Model 1503 can be pro- grammed to do its home control and security functions on a time sched- ule or in response to an event occurring in the system. This sec- tion describes how to program the Model 1503.

You may program the following items:

-Unit Numbers - on, off, on for time, off for time, dim, brighten

-Model 1101 Energy Saver Modules - on, off, on for time, off for time, low setback temperature, high setback temperature

-Temperatures - lo and hi tem- peratures

-All Lights On, All Off

-Security modes OFF, HOME, ASLEEP, AWAY, Bypass and Restore

-Buttons

These items can be programmed to happen:

-Once on a certain date (One-time program)

-Repeatedly (repeating programs)

-In response to an event (button programs).

Further, you can conditionalize programs so that they only run under certain circumstances.

Your security system can be in any mode while you program, OFF, HOME, ASLEEP or AWAY. However, you must enter your MASTER CODE if the security system is in HOME, ASLEEP, or AWAY. If an alarm is activated

32