What is REMOTE COMMANDS OK?

REMOTE COMMANDS OK allows you to prevent commands from being issued from a remote telephone. When set to YES, all commands can be executed remotely. When set to NO, lights, appliances, and the security system cannot be controlled remotely.

How do I change RINGS BEFORE ANSWER?

To change RINGS BEFORE ANSWER, enter a new number from 1 to 10, then press the ENTER key. The factory default is 8 rings.

What is DIAL TYPE and how do I change it?

DIAL TYPE specifies the type of dialing used when the Model 1503 dials out. To change it to PULSE, press 1 then ENTER. To change it to TONE, press 0 then ENTER. The default is TONE.

See ANSWERING MACHINES if you have one

Home Automation,

REMOTE COMMANDS OK?

The REMOTE COMMANDS OK? item allows you to prevent any commands from being issued from a remote telephone. When REMOTE COMMANDS OK? is set to YES, the Model 1503 will allow all commands to be executed when called from a remote tele- phone. If REMOTE COMMANDS OK? is set to NO, then lights, appliances and the security system cannot be controlled from a remote telephone that dials into your home.

You can issue commands from a local (in-house) phone with REMOTE COMMANDS OK? set to on or off.

If the system dials out, the called party can issue commands with REMOTE COMMANDS OK? set to on or off.

To set REMOTE COMMANDS OK? to NO, press 0 then ENTER. To change it back to YES, press 1 then ENTER.

The default for REMOTE COMMANDS OK? is YES.

RINGS BEFORE ANSWER

Your phone must ring this number of times before the Model 1503 will answer an incoming call to your phone.

See ANSWERING MACHINES if you have one.

To change RINGS BEFORE ANSWER, enter the new number from 1 to 10, then press the ENTER key.

The factory default for RINGS BEFORE ANSWER is 8.

DIAL TYPE

The DIAL TYPE specifies the type of dialing used when the Model 1503 dials out. If you do not have Touch Tone service, then DIAL TYPE must be set to PULSE.

To change the DIAL TYPE to PULSE, press 1 then ENTER. To change the DIAL TYPE to TONE, press 0 then ENTER.

The default dial type is TONE.

MY PHONE NUMBER

MY PHONE NUMBER is the phone number that will be announced when the Model 1503 dials out in the event of an alarm. It should be set to the phone number of the premises where your system is installed.

To enter phone numbers, press the keypad keys 0 - 9. You can put in a dash (-) for legibility by pressing the HOME-CONTROL-OFF key. Press the ENTER key after you have pressed all of the digits in the phone number.

For example, to enter the number 555-1234, press 5 5 5 HOME-CONTROL- OFF 1 2 3 4 ENTER.

DIAL OUT NUMBER 1

DIAL OUT NUMBER 1 is one of 4 numbers that are stored in the system. In the event of an alarm, these numbers are dialed in the order that is set up in the DIAL OUT ORDER for the particular type of alarm.

Home Automation 1503 owner manual See ANSWERING MACHINES if you have one, Home Automation

Models: 1503