log B
log
| Sets the log level for each module. If no log level is specified, the current level is used. | |
Synopsis | bcu log | |
Description | The number of messages logged by the host depends on the predetermined logging level. Although | |
| the adapter might generate many messages, only certain types of messages are logged based on | |
| the specified logging level. | |
Operands |
| Specifies the number of messages logged by the host, which depends on the |
|
| predetermined logging level. |
| port_id | Specifies the ID of the port for which you want to set the log level. |
| CriticalErrorWarningInfo | |
|
| Specifies the severity level. Supported log levels include Critical, Error, |
|
| Warning, or Info. If no level is set, the default setting is used, which is |
|
| Warning. |
|
| |
Example | #bcu log | |
| FW log level is Warning | |
| HAL log level is Warning | |
| FCS log level is Warning | |
| DRV log level is Warning | |
| AEN log level is Warning | |
| #bcu log | |
| Log level set to Info | |
| #bcu log | |
| FW log level is Info | |
| HAL log level is Info | |
| FCS log level is Info | |
| DRV log level is Info | |
| AEN log level is Info | |
See Also | None |
|
Brocade Adapters Administrator’s Guide | 147 |
|