Available BBCredit, Bandwidth | Brocade Communications Systems 804

DRAFT: BROCADE CONFIDENTIAL
	Appendix
Glossary and Acronyms	D

Available BB_Credit

	A value used by a transmitter to determine permission to transmit frames
	and, if so, how many. The transmitter may transmit a frame when the
	available BB_Credit is greater than zero.
Available_receive_buffers
	The current number of buffers in a receiving port that are available for
	receiving frames at link rate.
Bandwidth	The maximum information-carrying capacity of a system.
Baud	The encoded bit rate per second.
BCU	Brocade Command Line Utility (BCU).
Beaconing	A continuous signaling of error conditions on a LAN. Beaconing can occur
	either on the port or on one or both sides of the link (known as end-to-end
	beaconing).
Byte	A group of eight data bits.
Class of service	A frame delivery scheme exhibiting a specified set of delivery characteristics
	and attributes.
Credit	Permission given by a receiving port to a sending port to send a specified
	number of frames.
DCFM	Data Center Fabric Manager
Domain_ID	An eight-bit value that identifies a domain.
FCP	The Fibre Channel Protocol for mapping SCSI-3 operations to Fibre Channel.
FLOGI	FC Fabric Login request.
FL_Port	A switch port that is capable of arbitrated loop operations and is connected to
	one or more NL_Ports in an arbitrated loop topology.
FOS	Fabric Operating System.
FPMA	Fabric Provided MAC Address.
F_Port	Fabric Port. A port on a switch to which an N_Port connects.
HBA	The host bus adapter is a hardware facility in a node that provides an
	interface attachment.
HCM	Host Connectivity Manager.
IOC	I/O Controller.
ITL	Initiator-Target-LUN. An Initiator Port (HBA controller) talks to one Target Port
	addressing one LUN.

Brocade Adapters Administrator’s Guide	165
53-1001587-01

Image 179

Brocade Communications Systems 804 Available BBCredit, Availablereceivebuffers, Bandwidth, Baud, Beaconing, Byte, DomainID

Contents

June Brocade Adapters Brocade Communications Systems, Incorporated Contents Chapter Host Configuration Chapter Monitoring Appendix B Brocade Command Utility Appendix C HCM Troubleshooting Viii Brocade Adapters Administrator’s Guide 53-1001583-01 How this document is organized This section Italic text Document conventionsText formatting Bold text Brocade resources Additional informationKey terms Other industry resources Getting technical helpRelated documentation Documentation@brocade.com Document feedback Xiv Brocade Adapters Administrator’s Guide 53-1001583-01 Host bus adapters This chapter HCM software HCM features Tree node pop-up menus SAN component Pop-up menu feature Adapter operating system support Adapter support Launching the application on Windows platforms HCM software launch Launching the application on Linux platforms Remember passwordSkip login Changing an HCM application password Changing an HCM agent password Change HCM Agent Password dialog box, shown in , displays Downgrading driver only Software downgrade using Adapter Software InstallerHCM configuration data Downgrading HCM and driver or HCM only Restoring backed up data Backing up data after an uninstallData restoration Click Start Restore Host Connectivity Manager main window HCM main window LUN HCM product icons Event severity icons Discovery Setting up out-of-band discovery for an adapter Logging off HCM Configuring security authentication using HCM Host and HBA Host security authentication Brocade Adapters Administrator’s Guide Bcu auth --secretportid secretstring Configuring security authentication using the BCUBcu auth --algoportid mdsha1mssm Buffer credits Basic port configurationConfigurable using Port logging level Opening the Basic Port Configuration dialog box Port speed Configuring the port logging level using HCMConfiguring the port logging level using the BCU Configuring the port speed using HCM Frame data field size Configuring the port speed using the BCUSpecifying the maximum frame size using HCM Configuring the frame data field size using the BCU Persistent binding Enabling and disabling persistent binding using HCMEnabling and disabling persistent binding using the BCU QoS Configuring QoS on the switch side using the BCUConfiguring QoS on the HBA side using the BCU Target rate limiting Specifying path time out using HCMSpecifying path time out using the BCU Path time out Basic port configuration Configuring Boot over SAN Boot over SAN Boot over SAN Configuring fabric-based boot LUN discovery Pre-boot configuration Updating the boot image using the BCU Boot image updateUploading the boot image using HCM Creating a virtual port Virtual port configurationSelect Configure Virtual Port Create from the main menu Virtual port restrictions Deleting a virtual port Select Configure Virtual Port Delete from the main menu HCM logging levels Configuring the HCM logging level using HCM Opening the Advanced Port Configuration dialog box Advanced port configuration Select On from the Interrupt Control Coalesce list Configuring the Interrupt Control Coalesce using HCMInterrupt Control Coalesce Name validation Name configurationDual role changes Editing the name fields Defining a name Adding name entries Exporting the properties for a WWN Removing a name entry Importing the properties for a WWN Importing properties in Dcfm or FM format Importing properties in Efcm format Importing duplicated names Npiv Performance monitoring Monitoring Controlling the polling frequency rate Resetting statisticsPolling frequency rate Master log Severity column Filter buttonClear Filter button Sr No column Filtering event log entries HCM Application Log Application log Registering a host server Opening the Syslog Server Configuration dialog boxSyslog support Removing a host server Syslog host configuration using VMware Diagnostics using the BCU Diagnostics Fcdiag commands Diag commands Running a hardware-level test using HCM Diagnostics using HCM Hardware-level test parameters Hardware-level test parameters Click the FC Protocol Tests tab Running a Fibre Channel protocol-level test using HCM Test Log Details for Echo Test dialog box Displaying test log details Beaconing Configuring beaconing using HCMConfiguring beaconing using the BCU SFP management Displaying SFP information using the BCUDisplaying SFP information using HCM Portlogclear DebuggingSupportSave Portlog Automatic statistics collection SupportSave collection sources SupportSave collection on a port crash event SupportSave collection using HCMSupportSave collection using a command prompt SupportSave collection using a browser This appendix HCM Dialog Boxes This appendix Fields and components Authentication Statistics dialog boxOpening the dialog box Using the dialog box Browse button Backup dialog boxStart Backup button Output Directory text box Opening the properties panel Base Port Properties panel Using the dialog box Change HCM Password dialog box Change HCM Agent Password dialog box Configure Names dialog box Using the dialog box World wide name for the device Define Name dialog box Names button User/Administrator will manually fixDuplicated Names dialog box Append unique suffix for all repetitive Event Properties dialog box Fabric Statistics dialog box FCP IM Statistics dialog box HAL TM Successes HAL TM Related IO CleanupsHAL TM Offline Cleanup Completions HAL TM Firmware Responses FCP IM Module Statistics dialog box IO implicitly aborted IO aborted due to TM commandsIO comp with unknown tags Fibre Channel Security Protocol Configuration dialog box Apply button Group list Click the Hardware Tests tab Hardware Tests Diagnostics dialog box HBA Properties panel EC level Current # of LanesInitial Negotiated # of Lanes PCIe Generation IOC Statistics dialog box Firmware IO error REC Firmware IO xferrdy000 errorFirmware IO xferrdyunknownerror Firmware IO ITN Sler initiated Firmware IO REC timeouts Firmware Port FPG Sync Timeout Firmware IO IOH Error InterruptFirmware Port FPG Signal Lost Firmware Port FPG Signal Regained Firmware Port Snsm Error Resets Firmware Port Physm Laser FaultsFirmware Port Snsm Hwsm Timeouts Firmware Port Snsm Swsm Timeouts Firmware Port Lksm OLS TX Started Firmware Port Lksm LR TX StartedFirmware Port Lksm LRR TX Started Firmware Port Lksm NOS TX Started Logical Port Statistics dialog box Nsgidftsent MS command retriesMS command timeouts Nsrftidallocwait Lport Properties panel Refresh button Using the Master LogMaster Log tab Opening the Master Log Event Severity Master Log Filter dialog boxEvent Time Persistent Binding dialog box Select Configure Persistent Binding Operating Speed Port Properties panel Using the property panel Port Statistics dialog box Rx CRC err good EOF frames Errored framesLoss Of signal count Rx CRC err frames Protocol Tests dialog box QoS Statistics dialog box Remote Port Properties panel Start Restore button Restore dialog boxRestore from previous backup data Restore default data button Speed SFP Properties panel Vendor Part Length CuVendor Name Vendor OUI Host name / IP Address text box Syslog Server Configuration dialog box Target Statistics dialog box Rpsc sent Logo receivedRpsc received Rpsc rejects Offline online events Fw delete IOC down eventsFw delete exception events Offline delete events Brocade Adapters Administrator’s Guide 113 53-1001583-01 Result ConfigurationTest Log Details dialog box Test Virtual Port Creation dialog box Delete Selected button Cancel buttonVirtual Port Deletion dialog box Deletion check box Base Port Preboot CreatedVirtual Port Properties panel Virtual Port Statistics dialog box Brocade Adapters Administrator’s Guide 119 53-1001583-01 120 Brocade Adapters Administrator’s Guide 53-1001583-01 Brocade Command Utility About the BCU BCU commands Bios commands Controller IOC commands Networking Target persistent binding commands Adapter See Also Example Auth Statsclr ShowStats See Also None Operands Query BiosSynopsis bcu bios --query portid Pwwn,lun Operands BlunZone BootUpdate Bios Operands Portlog DebugPortlog portid HAL Beacon DiagOperands Sfpshow Tempshow Queuetest PciloopbackLoopback Memtest Val value DrvconfOperands Operands Stats Fabric Fcecho FcdiagOperands Fcping Fctraceroute Scsitest Switch WWN Switch Domain ID Ingress Port # Egress Port # Tov FcpimStatclr Pathtov Modstatsclr Intr IocDisabling the IOC is a destructive operation Operands Stats Delay Fwhalfcsdrvaenall CriticalErrorWarningInfoLog Operands Level Operands List LportSynopsis bcu lport --list portid Brocade-425 2.1.0.0 HB081222-RH4u7x86 Red Hat Enterprise Clear Pbind Portname Port Topology SpeedDfsize Port --name 1/0 Adapter Ioc Qos Operands Enable 124 RatelimDefspeed Osname Rport Rport Successfully reset the rport level stats Delete VportOperands Create Brocade Adapters Administrator’s Guide 161 53-1001583-01 162 Brocade Adapters Administrator’s Guide 53-1001583-01 HCM tab navigation HCM Troubleshooting 164 Brocade Adapters Administrator’s Guide 53-1001583-01 Bandwidth Class of serviceAvailable BBCredit Availablereceivebuffers NPort SwitchNameLossless Ethernet MAC LUN mapping Vlan 168 Brocade Adapters Administrator’s Guide 53-1001587-01 Index 170 Brocade Adapters Administrator’s Guide 53-1001583-01 SFP 172 Brocade Adapters Administrator’s Guide 53-1001583-01