Brocade Communications Systems 804 manual Target persistent binding commands

		BCU commands	B
	--dfsize	<port_id> [dfsize]
Target persistent binding commands
Note: Target persistent binding is available in Windows operating systems only.
bcu pbind	--list	<port_id> [<pwwn>]
	--clear	<port_id>
QoS commands
bcu qos	--enable	<port_id>
	--disable	<port_id>
	--query	<port_id>
	--stats	<port_id>
	--statsclr	<port_id>
Target rate limiting commands
bcu ratelim	--enable	<port_id>
	--disable	<port_id>
	--query	<port_id>
	--defspeed	<port_id> [<124>]
Remote port (rport) commands
bcu rport	--list	<port_id> [-l <lpwwn>]
	--query	<port_id> <rpwwn> [-l <lpwwn>]
	--stats	<port_id> <rpwwn> [-l <lpwwn>]
	--statsclr	<port_id> <rpwwn> [-l <lpwwn>]
	--osname	<port_id> [-l <lpwwn>]
Virtual port (vport) commands

Note: vport commands are not supported on Solaris platforms.

bcu vport	--create	<port_id> <vpwwn> [-n <vnwwn>] [-s <sname>]
	--delete	<port_id> <vpwwn>
	--query	<port_id> <vpwwn>
	--stats	<port_id> <vpwwn>
	--statsclr	<port_id> <vpwwn>

Brocade Adapters Administrator’s Guide	125
53-1001583-01