
Diagnostics using HCM | 5 |
Running a Fibre Channel protocol-level test using HCM
There are three
•Echo test, which sends an FC Echo ELS to a remote port.
•FC ping test, which requests the management server to test the connectivity with a given remote port (without zoning restrictions). Not supported in Solaris operating systems.
•FC traceroute test, which requests to enumerate the route between two given end points. Not supported in Solaris operating systems.
To run one of the
1.Select an adapter or port from the device tree.
2.Select Configure > Diagnostics from the main menu.
OR
3.Click the FC Protocol Tests tab.
FIGURE 22 Protocol-level diagnostic tests dialog box
Brocade Adapters Administrator’s Guide | 57 |
|