Manuals / Home Automation / Household Appliance / Home Security System

Home Automation 1503 Security System Operation, DISARMING THE SECURITY SYSTEM and, Home

Models: 1503

1 80
Download 80 pages 51.31 Kb
Page 13
Image 13
3.SECURITY SYSTEM OPERATION

3.SECURITY SYSTEM OPERATION

DISARMING THE SECURITY SYSTEM and

SILENCING ALARMS

Before going any further, you should know how to turn your alarm system OFF. Turning the system OFF disarms the burglar alarm, resets the fire and emergency alarms and silences all sirens and sounders.

Go to your console now and look at the keypad. You will note that there is a border around four keys with the word SECURITY at the top. The bottom key in this group is OFF. This key will be referred to as the SECURITY-OFF key.

Press the SECURITY-OFF key.

Now press the four digits of your MASTER CODE on the number keys.

That’s all there is to it.

Watch the display. The top line will read “DISARM SYSTEM: OFF:” The bottom line will read “CODE *BY- PASS #RESTORE”, indicating that your options are to enter your code number, or to bypass or restore zones. Do not be concerned with Bypass and Restore for now. For each digit that you press, an X will appear indicating that the key has been pressed.

After the fourth digit of your code is pressed, the console will beep once to indicate that you have

Model 1503 Owner's Manual

correctly disarmed the system, and the GREEN indicator on the SECU- RITY-OFF key will light.

If an incorrect code is entered, the words INVALID CODE will appear on the display and the console will beep three times.

In the event that you make a mistake, press the SECURITY-OFF key again, then enter your master code again.

Practice disarming your system until you are comfortable with this procedure. Do it at least 4 times.

NOTES:

1.If you accidentally press the HOME-CONTROL-OFF key (the bottom key in the HOME CONTROL group) instead of the SECURITY-OFF key, you can still turn off the alarm by entering your code.

2.If the alarm has been acti- vated, the keys in the PROGRAM- MING group are locked out. You must silence the alarm using the SECURITY-OFF, HOME, ASLEEP or AWAY keys.

TURNING THE SECURITY SYSTEM ON

Now that you know how to turn it off, here’s how to turn the secu- rity system ON. There are three available modes for the security system, HOME, ASLEEP and AWAY.

HOME

11

Page 12 Page 14
Page 13
Image 13
Home Automation 1503 owner manual Security System Operation, DISARMING THE SECURITY SYSTEM and, Silencing Alarms, Home
Page 12 Page 14

FAQ

How do I disarm the Home Automation 1503 security system?

To disarm the system, press the SECURITY-OFF key and enter your MASTER CODE on the keypad. Follow the instructions to correctly disarm the system.

What should I do if I enter an incorrect code when disarming the system?

If an incorrect code is entered, the console will display 'INVALID CODE' and beep three times. Press the SECURITY-OFF key again, then enter your master code again.

Can I still turn off the alarm if I accidentally press the HOME-CONTROL-OFF key instead of the SECURITY-OFF key?

Yes, you can still turn off the alarm by entering your code, even if you accidentally press the wrong key. Follow the instructions in the manual to disarm the system.