Home Automation 1503 owner manual Home Automation, Inc, A S L E E P, Away

Home Automation, Inc.

The HOME mode is intended for use when you and your family are in your home, and you wish to have doors and windows armed, but no interior motion detectors armed so that your family may move about freely inside the house. (PANIC, TAMPER and FIRE zones are always armed, as are the three EMERGENCY buttons on the console.) In the HOME mode, there is an ENTRY DELAY on the ENTRY-EXIT zone, so that an arriving family member can turn off the alarm before it sounds.

To put your system in the HOME mode,

Press the HOME key

Enter your code number on the keypad.

The console will beep once and the yellow indicator on the HOME key will light, meaning that you have armed the system in the HOME mode. The system will arm itself after the EXIT DELAY. If you make a mistake, press CANCEL to start over.

A S L E E P

The ASLEEP mode is used when you are asleep and everyone in your household is at home or not ex- pected to return home. In the ASLEEP mode, your doors, windows and non-sleeping area (i.e. down- stairs) motion detectors are armed.

In the ASLEEP mode, there is no entry delay. The alarm system will be activated immediately if any door, window or home interior mo- tion detector is tripped. There- fore, only use ASLEEP mode when everyone is home and ready for bed.

If you are going to sleep but a family member is expected home later, use the HOME mode so that there is an entry delay.

To put your system in the ASLEEP mode,

Press the ASLEEP key

Enter your code on the keypad.

The console will beep once and the red indicator on the ASLEEP key will light. If you make a mistake, press CANCEL and start over. The system will arm itself after the

EXIT DELAY.

AWAY

Use the AWAY mode when you leave your house and no one is home. All doors, windows, and motion detec- tors are armed.

All zones have an EXIT DELAY so that you will have time to leave your house and close the door after you arm the system. The system will be fully armed after the EXIT DE- LAY.

There is an ENTRY DELAY on the ENTRY-EXIT zone in the AWAY mode, so that you will have time to turn the system off when you return through your door.

Note that the ENTRY DELAY only applies if you come in through an ENTRY-EXIT zone. If someone at- tempts to climb into a window, or if an interior zone is tripped before the ENTRY-EXIT zone, the alarm will be activated immedi- ately.

12