Home Automation Model 1503 Owners, The default setting for ENTRY/ EXIT CHIME is YES

ON FOR ALARM UNIT NUMBERS

The ON FOR ALARM UNIT NUMBERS are turned on when the alarm is activated and the interior sounder begins to sound. The factory de- fault is 129, for ALL LIGHTS ON. If you want appliances (a radio, for example) to come on too, enter 129 and its unit number. Up to 6 unit numbers (including 129 for ALL LIGHTS ON) can be entered.

To enter new ON FOR ALARM UNIT NUMBERS, enter each unit number, then press the ENTER key once.

Model 1503 Owner's

press ENTER.

ENTRY/EXIT CHIME

When ENTRY/EXIT CHIME is set to YES, the console(s) will beep once when a door on an entry/exit zone is opened, even if the alarm system is off. This lets you know when children enter or leave the house, etc.

If you wish to turn the ENTRY/EXIT CHIME off, press 0 then ENTER to turn the feature off. To turn it back on, press 1 then ENTER.

The console will NOT beep when you press ENTER after a unit num- ber.

When you have entered the last unit number (up to 6 numbers are allowed,) press enter twice.

The console will beep and the new numbers will be redisplayed indicating that they have been accepted.

FLASH FOR ALARM UNIT

You may enter one unit number that will flash on and off continu- ously when the alarm is activated. This should be an outside light to alert neighbors and police to your home if the alarm is activated.

The default FLASH FOR ALARM UNIT is unit number 2. You may enter one new number for the unit number you wish to have flash, 0 for none, or 129 for ALL LIGHTS.

To change the FLASH FOR ALARM UNIT number, enter the new unit number then

The default setting for ENTRY/ EXIT CHIME: is YES.

BEEP ON TROUBLE?

If the Model 1503 detects trouble with itself or one of the zones connected to it, it will display a message on the screen and beep the console twice per second, continuously (i.e. beep beep...beep beep...). You can silence this sound by pressing the CANCEL key. However, if the trouble occurs again, the beeper will start beep- ing again.

If you do not wish to hear the beeping sound when trouble occurs, set BEEP ON TROUBLE? to NO by pressing 0 then ENTER. To turn the feature back on, press 1 then ENTER to set it to YES.

The display will still show the trouble indication when BEEP ON TROUBLE? is set to NO.

The default setting for BEEP ON TROUBLE? is YES.

71