Preparation
How to route cables
Speed clamps and bead bands are included with this System for bunching cables. Once properly bunched, follow the steps below to route the cables.
To the left | As viewed from the rear of the display. |
System cable | Speed clamps | Bead bands | Speaker cable |
To the right
Speaker cable | Speed clamps | Bead bands | System cable |
Bunch cables using provided speed clamps
Attaching speed clamps to the main unit
Connect the speed clamps using the 4 holes marked with • below, depending on your routing system.
Attaching and removing speed clamps
Insert 1into an appropriate hole on the rear of the Plasma Display and snap 2into the back of 1to fix the clamp.
Speed clamps are designed to be difficult to undo once in place. Please attach carefully.
Use pliers to twist the clamp 90°, pulling outward. The clamp may deteriorate over time and become damaged if removed.
2 1
Gather cables into a bunch, secure with provided bead bands
A
•Cables can be routed to the right or left.
