Pioneer PDP-5030HD, PDP-4330HD manual Preparation, Installing the Plasma Display, Locating

Preparation

Installing the Plasma Display

Over 50 cm (19 11/16 inch)

Over

10cm

(3 15/16

inch )

Locating

•Avoid the direct sunlight. Keep enough ventilation.

•The length of the system cable used to connect the Plasma Display and the Media Receiver is about 3 m (118 inch).

•Because the Plasma Display is heavy, be sure to move it by more than two persons.

L

•If you place anything on top of the Media Receiver it will not receive enough ventilation and not operate properly.

A

•Keep enough space around the upper and back parts when installing in order to ensure ventilation around the backside.

Using the optional PIONEER stand

•For details on installation refer to the instruction manual provided with the stand.

L

•This product may be used only with model PDK-TS01 stand, use with other stands may result in instability causing possible injury.

Using the optional PIONEER speakers

•For details on installation refer to the instruction manual provided with the speaker.

L

Operating Environment

Operating environment temperature and humidity: e0°C to e40°C (e32F to e104F); less than 20 % to 80% RH (cooling vents not blocked)

Avoid installing in the following locations:

•Under direct exposure to sunlight,

•Under strong artificial light,

•In high humidity,

•Poorly ventilated.

E-5