Furuno B042-008, B042-004, B042-016 manual Demonstration Mode, Demo menu

3. INITIAL SETTINGS

3.6Demonstration Mode

The demonstration mode provides a simulated video sounder picture. Connection of the transducer is not necessary. All controls are operational.

1.Turn on the power while pressing any key to display the installation main menu.

2.Press [+] to select DEMO.

XDCR SETTING INSTALLATION DEMO

DEMO MODE : OFF

[-/+]: Change setting, Turn OFF to exit

DEMO menu

3. Press ["] to select DEMO MODE, and then press [+] or [-] to open the dialog box.

OFF ON

4.Use [+] or [-] to select ON or OFF (default setting) as appropriate, and then press [!] or ["] to close the dialog box.

5.Turn off the power.

6.Turn on the power again after five seconds. “<DEMO>” appears at the bottom of the screen when the demonstration mode is on.

3-12