Furuno B042-008, B042-004, B042-016 manual Appendix Transducer 50BL-12/50BL-24H, AP-1

APPENDIX 1

TRANSDUCER 50BL-12/50BL-24H

When using the transducer 50BL-12/50BL-24H, see this appendix.

Transducer, thru-hull pipe and tank list

Frequency	Transducer	Hull	Tank	Fasten inside	Fasten outside
(kHz)		Material	(Code No.)	hull (Code No.)	hull (Code No.)
		Steel	T-693	TWB-6000	TFB-7000
			(000-015-044)	(000-015-207)	(000-015-209)
50/200	50BL-12/200B-8B
		FRP	T-693F	TWB-1100	-
			(000-015-241)	(000-015-218)
		Steel	T-696	TWB-6000	TFB-7000
			(000-015-048)	(000-015-207)	(000-015-209)
28/50	28F-24H/50BL-24H
		FRP	T-696F	TRB-1100	-
			(000-015-244)	(000-015-218)
		Steel	T-697	TWB-6000	TFB-7000
			(000-015-239)	(000-015-207)	(000-015-209)
50/88	50BL-24H/88F-126H
		FRP	T-697F	TRB-1100	-
			(000-015-245)	(000-015-218)
		Steel	T-695	TWB-6000	TFB-7000
			(000-015-047)	(000-015-207)	(000-015-209)
50/200	50BL-24H/200B-12H
		FRP	T-695F	TRB-1100	-
			(000-015-243)	(000-015-218)

Settings

1. Referring page 3-6, set the menu as below.

XDCR SELECT:	MANUAL
FREQ:	50 kHz

2.At the terminal board at the rear of the display unit, fasten the crimp-on lug to C position. (See page 3-5.)

Frequency	Output (kW)	Transducer	Terminal
50	2	50BL-12	C
	3	50BL-24H	C

AP-1