JBL Official Manual for Amplifiers: CS300.1 and CS60.4 Overview and Installation

Page 4

APPLICATIONS – CS300.1

The CS subwoofer amplifier is a single-channel amplifier. There are two sets of terminals to make it easy to connect multiple woofers. Either set of (+/–) terminals may be used when connecting woofers.

To the right are two application diagrams to help plan your subwoofer system installation. Figures 4 and 5 show how to configure the CS300.1 subwoofer amplifier.

NOTE: For simplicity, Figures 4 and 5 do not show power, remote and input connections.

NOTE: Minimum speaker load is 2 ohms total.

Figure 4. CS subwoofer amplifier with two woofers connected.

Figure 5. CS subwoofer amplifier with one woofer connected.

Image 4

Contents CS300.1 CS60.4 CS60.2 Installation Installation Warnings and TipsThank YOU Choosing a Location and Mounting the AmplifierPower Connections Power Connection Remote ConnectionWire Gauge Chart Ground ConnectionApplications CS300.1 CS subwoofer amplifier with two woofers connectedApplications CS60.4 CS60.4 can be set up for stereoChannel, 3-channel or bridged Channel operation, as shown CS60.2 used in bridge mode to drive a subwoofer Applications CS60.2Controls and Setup Troubleshooting Setting CrossoversSetting Input Sensitivity Symptom Likely Cause SolutionSpecifications CS300.1CS60.4 CS60.2