MP6612i
•LEVEL
Turn the rotary encoder clockwise to increase or
•Bass Center Frequency (C. FREQ)
Turn the rotary encoder clockwise to adjust the Bass Center Frequency to 60, 80, 100 or 200Hz.
•Bass Quality Factor (BASS-Q)
Turn the rotary encoder to select one of the following Bass Quality Factor options: 1N, 2N, 2W, 1W. The following chart depicts the curve characteristics for each step:
Bass Quality Factor Curve Characteristics
Mid-Range (MID)
To adjust
•LEVEL
Turn the rotary encoder clockwise to increase or
•Mid-Range Center Frequency (C.FREQ)
Turn the rotary encoder to adjust the
•Mid-Range Quality Factor (MID-Q)
Turn the rotary encoder to select one of the following
Quality Factor options: 1N, 2N, 2W, 1W. The following chart depicts the curve characteristics for each step:
Middle Quality Factor Curve Characteristics
TREBLE
To adjust Treble options, press the MENU button (22) repeatedly until “TREBLE” appears in the display. Press the TUNE/TRACK >> or << buttons (19) to access the following Treble settings:
•LEVEL
Turn the rotary encoder clockwise to increase or
•Treble Center Frequency (C. FREQ)
Turn the rotary encoder clockwise to adjust the Treble Center Frequency to 10KHz, 12.5KHz, 15KHz or 17.5KHz.
LOUD
When listening to music at low volume levels, this feature will boost the bass and treble ranges to compensate for the characteristics of human hearing. To adjust the Loudness settings, press the MENU button (22) repeatedly until “LOUD” appears in the display. Press the TUNE/TRACK >> or << buttons (19) to access the following settings:
•LOUD
Turn the rotary encoder to turn the Loudness feature ON/OFF.
•LEVEL
Adjust gain to LOW, MID, or HIGH.
•Peak Frequency (P. FREQ)
Turn the rotary encoder to adjust the Peak Frequency to 400Hz, 800Hz, or 2.4KHz.
•BOOST
Turn the rotary encoder to select “Flat” or “On” (Bass Boost).
8